How to read data from TZ-BT04/05/05B sensor with GH5200 device

From Teltonika Telematics Wiki
Main Page > Autonomous Trackers > GH5200 > GH5200 FAQ > How to read data from TZ-BT04/05/05B sensor with GH5200 device

How to read data from TZ-BT04/05/05B sensor with GH5200 device

Solution applies for these SAS devices

| TMT250 | GH5200 |

Configuration

These are instructions on how to easily read data from TZ-BT04/05/05B Bluetooth LE sensor with GH5200 device.

First the GH5200 device Bluetooth settings need to be configured. These are the required steps:
  • Press Bluetooth settings.
  • Turn on BT Radio by pressing Enable (hidden) or Enable (visible).
  • Press Bluetooth 4.0 settings.
  • Select TZ-BT04/05/05B sensor in BLE connectionless functionalities section.
  • Type your TZ-BT04/05/05B ID in ID field.
  • After all these steps press Save to device to save configuration.
  • To start BLE scan right away press Discover BLE.


More information about these settings can be found on GH5200 Bluetooth 4.0 Configuration modes page.



TZ-BT04_05_05B_data
TZ-BT04_05_05B_data

To check if the GH5200 device has already received data from TZ-BT04/05/05B Bluetooth LE sensor, follow these steps:

  • Navigate toStatus section.
  • Press I/O Info and look if BLE Temp, BLE Battery and BLE Humidity has any values.