Changes

==Deep Sleep mode==

==Deep Sleep mode==

While in deep sleep mode, {{{model|FMB1YX}}} sets GNSS receiver to sleep mode and turns off GSM/GPRS module (it is not possible to wake up device via SMS). Despite records with last known coordinate being saved and sent to AVL server (GSM/GPRS module is turned on to send data and then it is turned off), power usage is decreased to save vehicle's battery. Note, that power saving depends on two configurable parameters: send period and minimum record saving period in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and FMB120 will enter deep sleep mode immediately.<br/>Because a lot of functions are disabled in deep sleep mode 13 I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, Speed, GSM CellID, GSM Area Code, Fuel rate GPS, Active GSM Operator, Trip Odometer, Total Odometer, Fuel Used GPS and ICCID.

While in deep sleep mode, {{{model|FMB1YX}}} sets GNSS receiver to sleep mode and turns off GSM/GPRS module (it is not possible to wake up device via SMS). Despite records with last known coordinate being saved and sent to AVL server (GSM/GPRS module is turned on to send data and then it is turned off), power usage is decreased to save vehicle's battery. Note, that power saving depends on two configurable parameters: send period and minimum record saving period in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and {{{model|FMB1YX}}} will enter deep sleep mode immediately.<br/>Because a lot of functions are disabled in deep sleep mode 13 I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, Speed, GSM CellID, GSM Area Code, Fuel rate GPS, Active GSM Operator, Trip Odometer, Total Odometer, Fuel Used GPS and ICCID.

FMB120 can enter deep sleep mode if ALL of these conditions are met:

{{{model|FMB1YX}}} can enter deep sleep mode if ALL of these conditions are met:

* FMB120 has to be configured in Deep Sleep Mode and Sleep Timeout is reached;

* {{{model|FMB1YX}}} has to be configured in Deep Sleep Mode and Sleep Timeout is reached;

* Device must have time synchronized with GNSS satellites and have GPS fix;

* Device must have time synchronized with GNSS satellites and have GPS fix;

* Ignition (configured ignition source) is off;

* Ignition (configured ignition source) is off;

* Movement is not detected by accelerometer or configured movement source;

* Movement is not detected by accelerometer or configured movement source;

* ''Min. Record Saving Period'' ([[FMB120 Data acquisition settings|Data Acquisition Mode settings]]) must be larger than ''Open Link Timeout'' parameter, so that {{{model|FMB1YX}}} could close GPRS link;

* ''Min. Record Saving Period'' ([[FMB120 Data acquisition settings|Data Acquisition Mode settings]]) must be larger than ''Open Link Timeout'' parameter, so that {{{model|FMB1YX}}} could close GPRS link;

* The difference between ''Send Period'' ([[FMB120 Data acquisition settings|Data Acquisition Mode settings]]) and ''Open Link Timeout'' must be more than 90, so that {{{model|FMB1YX}}} could close GPRS link within at least 90 seconds;

* The difference between ''Send Period'' ([[FMB120 Data acquisition settings|Data Acquisition Mode settings]]) and ''Open Link Timeout'' must be more than 90 seconds, so that {{{model|FMB1YX}}} could close GPRS link within at least 90 seconds;

* Forced wakeup is not set;

* Forced wakeup is not set;

* There are no SMS messages being received;

* There are no SMS messages being received;