1,247
edits
Changes
Template:FMB1 Mounting recommendations (view source)
Revision as of 10:29, 31 May 2018
, 10:29, 31 May 2018no edit summary
* Wires cannot be connected to the board computers or control units.
* Wires cannot be connected to the board computers or control units.
</font>
</font>
<font size="+2"><span style=color:#F49E21> 2. </span> Connecting power source. </font>
<font size="+1"><span style=color:#F49E21> 2. </span> Connecting power source. </font>
<font size="+1">
<font size="+1">
* Be sure that after the car computer goes to sleep mode, power might be still available on the power wires. Depending on the car model, this may happen in 5 to 30 minutes period.
* Be sure that after the car computer goes to sleep mode, power might be still available on the power wires. Depending on the car model, this may happen in 5 to 30 minutes period.
* 3 A, 125 V external fuse shall be used.
* 3 A, 125 V external fuse shall be used.
</font>
</font>
<font size="+2"><span style=color:#F49E21> 3. </span> Connecting ignition wire. </font>
<font size="+1"><span style=color:#F49E21> 3. </span> Connecting ignition wire. </font>
<font size="+1">
<font size="+1">
* Be sure to check if it is a real ignition wire i. e. power does not disappear after starting the engine.
* Be sure to check if it is a real ignition wire i. e. power does not disappear after starting the engine.
* Ignition is connected to the ignition relay output. As alternative, any other relay, which has power output when ignition is on, may be chosen.
* Ignition is connected to the ignition relay output. As alternative, any other relay, which has power output when ignition is on, may be chosen.
</font>
</font>
<font size="+2"><span style=color:#F49E21> 4. </span> Connecting ground wire. </font>
<font size="+1"><span style=color:#F49E21> 4. </span> Connecting ground wire. </font>
<font size="+1">
<font size="+1">
* Ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.
* Ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.
<font size="+3"><span style=color:#FF0000>'''Safety information'''</span></font><br/>
<font size="+2"><span style=color:#FF0000>'''Safety information'''</span></font><br/>
<font size="+2">
<font size="+1">
This message contains information on how to operate {{{model|FMB1YX}}} safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!<br/>
This message contains information on how to operate {{{model|FMB1YX}}} safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!<br/>
The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +10..+30 V DC.<br/>
The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +10..+30 V DC.<br/>
<font size="+3"><span style=color:#104996>'''Precautions'''</span></font>
<font size="+2"><span style=color:#104996>'''Precautions'''</span></font>
<font size="+2">
<font size="+1">
{| class="wikitable" style="border-style: solid; border-width: 0px"
{| class="wikitable" style="border-style: solid; border-width: 0px"
|+
|+
