720
edits
Changes
Template:FM36YX GSM settings, GPRS part (view source)
Revision as of 13:43, 31 May 2018
, 13:43, 31 May 2018Created page with "GPRS defines main parameters for FM3612: GSM operator APN and GPRS username and password (optional – depending on operator), destination server IP and port, and allows to se..."
GPRS defines main parameters for FM3612: GSM operator APN and GPRS username and
password (optional – depending on operator), destination server IP and port, and allows to set
protocol used for data transfers – TCP or UDP.
Yet user can choose if device will work only in GSM network, or it will prefer 3G network
and switch to GSM only then 3G is absent.
Some operators use specific authentication for GPRS session – CHAP or PAP. If any of these
is used, APN should be entered as ‘chap:<APN>’ or ‘pap:<APN>’. I.e. if operator is using APN
‘internet’ with CHAP authentication, it should be entered as ‘chap:internet’. Information
about APN and authentication type should be provided by your GSM operator
<br>
'''Figure 23 GPRS_configuration'''
[[Image:GPRS_configuration.pgn]]
password (optional – depending on operator), destination server IP and port, and allows to set
protocol used for data transfers – TCP or UDP.
Yet user can choose if device will work only in GSM network, or it will prefer 3G network
and switch to GSM only then 3G is absent.
Some operators use specific authentication for GPRS session – CHAP or PAP. If any of these
is used, APN should be entered as ‘chap:<APN>’ or ‘pap:<APN>’. I.e. if operator is using APN
‘internet’ with CHAP authentication, it should be entered as ‘chap:internet’. Information
about APN and authentication type should be provided by your GSM operator
<br>
'''Figure 23 GPRS_configuration'''
[[Image:GPRS_configuration.pgn]]
