777
edits
Changes
no edit summary
• Tachograph data *<br />
• Tachograph data *<br />
''Availability of parameter depends on vehicle’s model and configuration of FMS interface of the truck.''
''J1708 is additional FMS protocol used by some vehicle manufacturers. If your vehicle supports J1939 and J1708 both protocols then you must disable J1708 in configuration to receive fuel data. ''
''General description:''
''General description:''
* CAN works if no USB cable is inserted and isn’t in deep sleep mode;
* CAN works if no USB cable is inserted and isn’t in deep sleep mode;
* Uses six different speeds: 50 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 1000kbps;
* Uses six different speeds: 50 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 1000kbps;
* Using mask, filters required bytes;
* Using mask, filters required bytes;
* Different CAN configurations.
* Different CAN configurations.
Configuration
''Configuration''
Manual CAN data can be configured using “Manual CAN” in CAN tab.
Manual CAN data can be configured using “Manual CAN” in CAN tab.
