777
edits
Changes
Created page with "K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout paramater is used to set interval between K-Li..."
K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout paramater is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as seperate packet.
To configure any K-Line parameter, every parameter should be separated with comma.
For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like:
“ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”)
Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“
Other Kline properties can be configured in the same logic.
[[Image:kline_tab.png|none]]
To configure any K-Line parameter, every parameter should be separated with comma.
For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like:
“ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”)
Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“
Other Kline properties can be configured in the same logic.
[[Image:kline_tab.png|none]]
