Changes

|-

|-

! style="text-align: center; vertical-align: center;" colspan=1 |Configuring format: <br/> (setparam Y271 X)

! style="text-align: center; vertical-align: center;" colspan=1 |Configuring format: <br/> (setparam Y271 X)

| style="text-align: center; vertical-align: center;" colspan=6 |X is start position. If no X is set starts from 0 <br/> Max 19 operator codes can be set (separated by comma) in one SMS command.

| style="left-align: center; vertical-align: center;" colspan=6 |X is start position. If no X is set starts from 0 <br/> Max 19 operator codes can be set (separated by comma) in one SMS command.

|-

|-

! style="text-align: center; vertical-align: center;" colspan=1 |Reading format:<br/> (getparam Y271 X)

! style="text-align: center; vertical-align: center;" colspan=1 |Reading format:<br/> (getparam Y271 X)

| style="text-align: center; vertical-align: center;" colspan=6 |X values can be 1,2,3.<br/> If X = 1, Operator codes from 0-19 are read from configuration and sent via SMS.<br/> If X = 2, Operator codes from 20-39 are read from configuration and sent via SMS.<br/> If X = 3, Operator codes from 40-49 are read from configuration and sent via SMS.<br/> If X = any other, Operator codes from 0-19 are read from configuration and sent via SMS<br/> *User must use X, without X value device responds that parameter is wrong or it can respond with wrong operator codes.

| style="left-align: center; vertical-align: center;" colspan=6 |X values can be 1,2,3.<br/> If X = 1, Operator codes from 0-19 are read from configuration and sent via SMS.<br/> If X = 2, Operator codes from 20-39 are read from configuration and sent via SMS.<br/> If X = 3, Operator codes from 40-49 are read from configuration and sent via SMS.<br/> If X = any other, Operator codes from 0-19 are read from configuration and sent via SMS<br/> *User must use X, without X value device responds that parameter is wrong or it can respond with wrong operator codes.

|-

|-

|}

|}