Changes

==Deep Sleep mode==

==Deep Sleep mode==

While in deep sleep mode, {{{model|FM36YX}}} sets GNSS receiver to sleep mode and turns off GSM/GPRS/3G module (it is not possible to wake up device via SMS). Despite records with last known coordinate being saved and sent to AVL server (GSM/GPRS/3G module is turned on to send data and after that it is turned off again), power usage is decreased to save vehicle’s battery. Note, that power saving depends on two configurable parameters: send period and min. record saving period.

While in deep sleep mode, {{{model|FM36YX}}} sets GNSS receiver to sleep mode and turns off GSM/GPRS/4G module (it is not possible to wake up device via SMS). Despite records with last known coordinate are being saved and send to AVL server (GSM/GPRS/4G module is turned on to send data and after that it is turned off again), power usage is decreased to save vehicle’s battery. Note, that power saving depends on two configurable parameters: send period and Min. record saving period.

{{{model|FM36YX}}} can enter deep sleep mode if '''ALL''' of these conditions are met:

{{{model|FM36YX}}} can enter deep sleep mode if '''ALL''' of these conditions are met:

* Ignition (DIN1) is off;

* Ignition (DIN1) is off;

* Min. Record Saving Period (Data Acquisition Mode settings) must be bigger than Active Data Link Timeout parameter, that {{{model|FM36YX}}} could close GPRS/3G link.

* Min. Record Saving Period (Data Acquisition Mode settings) must be bigger than Active Data Link Timeout parameter, that {{{model|FM36YX}}} could close GPRS/3G link.

* Difference between send period (Data Acquisition Mode settings) and Active Data Link Timeout must be more than 90 sec., that {{{model|FM36YX}}} could close GPRS/3G link for at least 90 sec.

* Difference between send period (Data Acquisition Mode settings) and Active Data Link Timeout must be more than 90 sec., that FM36M1 could close GPRS/4G link for at least 90 sec;

* USB cable is not connected.

* USB cable is not connected.