Changes

Template:FMA1 Scenarios settings (view source)

Revision as of 09:10, 23 August 2018

966 bytes removed ,  09:10, 23 August 2018
no edit summary
Line 13: Line 13:  
===Green Driving===
 
===Green Driving===
 
----
 
----
−
Helps to prevent and inspect driver about harsh driving. Scenario continuously monitors: accelerating force, braking force and cornering angles. Warns driver if needed. DOUT1 or DOUT2 is controlled by scenario for user needs, for example buzzer or LED. <br>
+
Helps to inspect driver and prevent about harsh driving. Green driving source can be GPS or accelerometer.  Scenario continuously monitors: accelerating force, braking force and cornering angles depending on build in accelerometer or depending on GPS. The device inspects driver if needed. Monitoring sensitivity is configurable. The scenario can control DOUT to alert the driver, with, for example, a buzzer or an LED.<br/>
−
To save 3G(in FM36M1 4G)/GPRS traffic Green Driving '''event''' will be '''generated (included into sent records) only''' when measured values are higher than those set in configuration, without additional I/O settings.<br>
+
To save GPRS traffic Green Driving event will be generated (included into sent records) only when FMA120 measured values are higher than those set in configuration, without additional I/O settings.
 +
<br>
 
To prevent generating false events, harsh acceleration and harsh braking is monitored only when following conditions are fulfilled:
 
To prevent generating false events, harsh acceleration and harsh braking is monitored only when following conditions are fulfilled:
 
* Ignition is ON (DIN1 = 1)
 
* Ignition is ON (DIN1 = 1)
Line 39: Line 40:  
'''Digital output control:'''<br>
 
'''Digital output control:'''<br>
 
DOUTX (selected digital output) is ON, while vehicle speed exceeds parameter value. DOUTX is activated until current speed decreases below parameter value.<br>
 
DOUTX (selected digital output) is ON, while vehicle speed exceeds parameter value. DOUTX is activated until current speed decreases below parameter value.<br>
−
  −
===Excessive Idling Detection===
  −
----
  −
Scenario informs you if your vehicle is stationary but engine is on for selected period of time to help you to save fuel.<br>
  −
  −
If ignition is ON and no movement, event will be generated when TMO reached. User can enable this functionality, select timeouts for stationary time and for movement time.<br><br>
      
===Jamming detection===
 
===Jamming detection===
Line 52: Line 47:  
'''Digital output control:'''<br>
 
'''Digital output control:'''<br>
 
DOUTX (selected digital output) is ON, while modem is fixing radio frequency jamming. After jamming is over, DOUTX is deactivated.<br><br>
 
DOUTX (selected digital output) is ON, while modem is fixing radio frequency jamming. After jamming is over, DOUTX is deactivated.<br><br>
−
  −
===Authorized driving===
  −
----
  −
Gives ability to use vehicle for 500 specific iButton owners (specified in iButton list). DOUT2 or DOUT1 is controlled by scenario for user needs, to manage buzzer, LED, etc.
  −
{| class="wikitable" style="border-style: solid; border-width: 0px"
  −
|+
  −
|-
  −
| style="text-align: left; background: #F6F6FB;"        | [[Image:Bw_nb.png|50px]]
  −
| style="text-align: left; background: #F6F6FB;"        | Note: In order for Authorized driving to work properly, at least 1 iButton ID must be written to the iButton list.
  −
|}
  −
'''Digital output control:'''<br>
  −
DOUTX (selected digital output) is continuously OFF. DOUTX turns ON if Ignition turns ON (configured Ignition Source=1). After authorizing iButton (iButton ID is read and it matches the ID from the iButton list), DOUT2 turns OFF. After successful authorization ignition can be turned OFF (configured Ignition Source =0) for no longer than 30 seconds, otherwise authorization must be repeated.<br><br>
      
===Immobilizer===
 
===Immobilizer===
Line 70: Line 53:  
'''Digital output control:'''<br>
 
'''Digital output control:'''<br>
 
DOUTX (selected digital output) is continuously OFF. DOUTX turns ON if Ignition turns ON (configured Ignition Source = 1). After iButton ID is read (any iButton is attached), DOUTX turns OFF. After iButton identification, ignition can be turned OFF (configured Ignition Source = 0) for no longer than 30 seconds, otherwise immobilizer must be repeated.<br><br>
 
DOUTX (selected digital output) is continuously OFF. DOUTX turns ON if Ignition turns ON (configured Ignition Source = 1). After iButton ID is read (any iButton is attached), DOUTX turns OFF. After iButton identification, ignition can be turned OFF (configured Ignition Source = 0) for no longer than 30 seconds, otherwise immobilizer must be repeated.<br><br>
 +
 +
===iButton detect ===
 +
----
 +
If iButton is read, scenario activates configured DOUT for 500 ms. Second activation will be available only when iButton I/O element value goes back to 0, or another iButtob is read.
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/17741"

Navigation menu