0
edits
Changes
Troubleshooting LV-CAN200, ALL-CAN300, CAN-CONTROL (view source)
Revision as of 15:29, 16 October 2018
, 15:29, 16 October 2018no edit summary
|-
|-
! style="text-align: left;" | CAN adapter generates errors in the vehicle
! style="text-align: left;" rowspan="4" | CAN adapter generates errors in the vehicle
|| CAN adapter was installed in a different car and has been programmed with incorrect program number. || Make sure that the correct program number was introduced (look the connection scheme of CAN adapter).
|| CAN adapter was installed in a different car and has been programmed with incorrect program number.
|| Make sure that the correct program number was introduced (look the connection scheme of CAN adapter).
|-
|rowspan="3"| Wrong CAN bus connection
|| Make sure that the correct CAN bus is connected in the vehicle (look the connection scheme of CAN adapter).
|-
| Make sure that the CAN1 and CAN2 buses are not mixed (look the connection scheme of CAN adapter).
|-
| Make sure that the lines CAN-H and CAN-L are not mixed (look the connection scheme of CAN adapter).
|-
|-
! style="text-align: left;" rowspan="2" | The connection scheme does not match the car – absence of the wires indicated in the vehicle indicated in the connection scheme
! style="text-align: left;" rowspan="2" | The connection scheme does not match the car – absence of the wires indicated in the vehicle indicated in the connection scheme
|| On the east market older models of the vehicles are still produced (for example IVECO EUROCARGO 2008 EURO 3 while on the west market the vehicle meets the EURO 4 standard).
|| On the east market older models of the vehicles are still produced (for example IVECO EUROCARGO 2008 EURO 3 while on the west market the vehicle meets the EURO 4 standard).
|| Look at the connection scheme of vehicle's older models.
|-
|-
| Sometimes the wire colours on the scheme are different from the wire colours in the vehicle. || Please connect to the wires indicated in the connection scheme paying attention to the number of the PINs. The number of the PINs of the diagnostic connector are compatible with the OBD2 standard.
| Sometimes the wire colours on the scheme are different from the wire colours in the vehicle. || Please connect to the wires indicated in the connection scheme paying attention to the number of the PINs. The number of the PINs of the diagnostic connector are compatible with the OBD2 standard.
|-
|-
|}
|}
