|
|
| Line 1: |
Line 1: |
| [[Image:Qsg_rut950_teltonika.PNG|centre]]
| | {{Template:FMB64 First start card|model=FMB640|sim_type=|antenna=external GNSS, GSM antennas}} |
| | |
| <b>{{{model|FMB640}}} GNSS/GSM/Bluetooth terminal with {{{antenna|GNSS/GSM antennas}}} and Ni-MH battery</b>
| |
| {{{pic|[[Image:Fmb640.png|400px|center]]}}}
| |
| | |
| =='''How to insert {{{sim_type|Micro-}}}SIM card'''==
| |
| | |
| # Unscrew the '''screws'''.
| |
| # Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
| |
| # Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB640 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.}}}
| |
| # Attach device '''cover''' and put the '''screws''' back in.
| |
| # Device is ready to be connected.
| |
| | |
| [[Image:1_fmb640_SIM.png|280px]][[Image:2_fmb640_SIM.png|280px]][[Image:3_fmb640_SIM.png|280px]][[Image:4_fmb640_SIM.png|280px]]
| |
| | |
| | |
| {|
| |
| |-
| |
| | [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
| |
| |}
| |
| | |
| =='''How to insert microSD card'''==
| |
| | |
| # Push microSD card lock case.
| |
| # Open microSD card locker.
| |
| # Correctly insert microSD card into slot.
| |
| # Close microSD card locker.
| |
| # Push microSD card lock case to locked position.
| |
| | |
| [[Image:Sd_card_1.png|x150px]] [[Image:Sd_card_2.png|x150px]] [[Image:Sd_card_3.png|x150px]] [[Image:Sd_card_4.png|x150px]] [[Image:Sd_card_5.png|x150px]]
| |
|
| |
|
| =='''2x12 socket pinout'''== | | =='''2x12 socket pinout'''== |
