6,023
edits
Changes
Template:FMB Accelerometer Features settings (view source)
Revision as of 14:27, 6 November 2018
, 14:27, 6 November 2018→Crash Detection
If ''Crash Trace'' is disabled a crash detection event will be generated (included into the sent record) only when scenario starts and finishes.<br/>
If ''Crash Trace'' is disabled a crash detection event will be generated (included into the sent record) only when scenario starts and finishes.<br/>
If ''Crash Trace'' is enabled, {{{model|FMB1YX}}} will collect acceleration data every time period defined by ''Trace ODR (Hz)'' parameter, GNSS data every time period defined by ''GNSS duration (s)'' parameter and IO data every time period defined by ''IO duration (s)'' parameter. Buffer is big enough to hold:
If ''Crash Trace'' is enabled, {{{model|FMB1YX}}} will collect acceleration data every time period defined by ''Trace ODR (Hz)'' parameter. Buffer is big enough to hold:
* Acceleration data for up to 15 seconds before crash event and 15 seconds after; <br/>
* Acceleration data for up to 15 seconds before crash event and 15 seconds after; <br/>
* GNSS / IO data for up to 30 seconds before crash event and 30 seconds after. <br/>
* GNSS / IO data for up to 30 seconds before crash event and 30 seconds after. <br/>
Acceleration, GNSS and IO data duration is set by ''Accel duration (s)'', ''GNSS duration (s)'' and ''IO duration (s)'' parameters. <br/>
On Crash Event detection, records will be generated from this buffer, following these conditions:<br/>
On Crash Event detection, records will be generated from this buffer, following these conditions:<br/>
'''Trace Changes'''
'''Trace Changes'''
