Changes

{{{model|FMB1YX}}} is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode. When in GPS sleep mode, {{{model|FMB1YX}}} turns GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>{{{model|FMB1YX}}} will enter GPS sleep mode if ALL of these conditions are met:

{{{model|FMB1YX}}} is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode. When in GPS sleep mode, {{{model|FMB1YX}}} turns GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>{{{model|FMB1YX}}} will enter GPS sleep mode if ALL of these conditions are met:

* {{{model|FMB1YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;

* {{{model|FMB1YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;

* From Firmware 03.18.15 version, GPS Sleep mode depends on records saving/sending without TS parameter:

* Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on “Records saving/sending without TS” parameter:

:* After Position Fix - {{{model|FMB1YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;

:* After Position Fix - {{{model|FMB1YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;

:* After Time Sync - {{{model|FMB1YX}}} time is synchronized over NTP, NITZ or GNSS satellites;

:* After Time Sync - {{{model|FMB1YX}}} time is synchronized over NTP, NITZ or GNSS satellites;

* {{{model|FMB1YX}}} is configured in Deep Sleep mode and sleep timeout is reached;

* {{{model|FMB1YX}}} is configured in Deep Sleep mode and sleep timeout is reached;

* From Firmware 03.18.15 version, Deep Sleep mode depends on records saving/sending without TS parameter:

* Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on “Records saving/sending without TS” parameter:

:* After Position Fix - {{{model|FMB1YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;

:* After Position Fix - {{{model|FMB1YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;

:* After Time Sync - {{{model|FMB1YX}}} time is synchronized over NTP, NITZ or GNSS satellites;

:* After Time Sync - {{{model|FMB1YX}}} time is synchronized over NTP, NITZ or GNSS satellites;