Changes

System settings have following configurable parameters:

System settings have following configurable parameters:

* ''Sleep Settings'', where user can choose sleep mode;{{{txt_tmt_wipe|

* ''Sleep Settings'', where user can choose sleep mode;{{{txt_tmt_wipe|

* ''Ignition Source'', where user can choose an ignition source from digital input 1, power voltage{{{txt_fmb0|, engine RPM}}} and accelerometer. More than one ignition source can be selected at the same moment. User can select movement start and movement stop delay time - those parameters are used when accelerometer is selected as an ignition source. Ignition status is used in power management and the following functionalities: eco driving, excessive idling, fuel consumption, over speeding, towing and trip;

* ''Ignition Source'', where user can choose an ignition source from digital input 1, power voltage{{{txt_fmb0|, engine RPM}}} and accelerometer. More than one ignition source can be selected at the same moment. When there are 2 or more sources selected, at least one condition has to be met to change Ignition status. Example: DIN1 and Accelerometer are selected as Ignition source. When the device detects movement, Ignition status will change to 1, regardless that DIN1 value is 0. User can select movement start and movement stop delay time - those parameters are used when accelerometer is selected as an ignition source. Ignition status is used in power management and the following functionalities: eco driving, excessive idling, fuel consumption, over speeding, towing and trip;

* Object motion detection settings, where user can configure {{{txt_num|4}}} ways how {{{model|FMB1YX}}} detects movement and change its working mode (for more information refer to section {{{ctrDaq|[[{{{model|Template:}}} Data acquisition settings]]}}}). Other functionalities that depend on movement source are: power manager, fuel consumption and trip;}}}

* Object motion detection settings, where user can configure {{{txt_num|4}}} ways how {{{model|FMB1YX}}} detects movement and change its working mode (for more information refer to section {{{ctrDaq|[[{{{model|Template:}}} Data acquisition settings]]}}}). Other functionalities that depend on movement source are: power manager, fuel consumption and trip;}}}

* ''Static Navigation Settings'', where user can turn static navigation on or off{{{txt_tmt_wipe|. Additionally, user can choose which source (movement or ignition) is used to activate/deactivate static navigation}}};

* ''Static Navigation Settings'', where user can turn static navigation on or off{{{txt_tmt_wipe|. Additionally, user can choose which source (movement or ignition) is used to activate/deactivate static navigation}}};