6,023
edits
Changes
Template:FMB Accelerometer Features settings (view source)
Revision as of 16:57, 6 February 2019
, 16:57, 6 February 2019→Crash Detection
If ''Crash Trace'' is disabled only one eventual crash record will be generated when ''Duration (ms)'' and ''Threshold (mg)'' values are exceeded. <br/>
If ''Crash Trace'' is disabled only one eventual crash record will be generated when ''Duration (ms)'' and ''Threshold (mg)'' values are exceeded. <br/>
If ''Crash Trace'' is enabled, {{{model|FMB1YX}}} will collect crash trace data with frequency defined by ''Trace ODR (Hz)'' parameter. Acceleration, GNSS and IO data monitoring duration during the crash event is defined by these parameters: <br/>
If ''Crash Trace'' is enabled, {{{model|FMT100}}} will collect crash trace data with frequency defined by ''Trace ODR (Hz)'' parameter. Acceleration, GNSS and IO data monitoring duration during the crash event is defined by these parameters: <br/>
* ''Accel duration (s)''. Acceleration data duration can be set for up to 15 seconds before crash event and 15 seconds after; <br/>
* ''Accel duration (s)''. Acceleration data duration can be set for up to 15 seconds before crash event and 15 seconds after; <br/>
* ''GNSS duration (s)''. GNSS data duration can be set for up to 30 seconds before crash event and 30 seconds after. <br/>
* ''GNSS duration (s)''. GNSS data duration can be set for up to 30 seconds before crash event and 30 seconds after. <br/>
