Line 1: |
Line 1: |
| {{{mounting_recommendations|=='''Mounting recommendations'''== | | {{{mounting_recommendations|=='''Mounting recommendations'''== |
| | | |
− | {{{connecting_wires|* Connecting wires | + | {{{connecting_wires|* <big>Connecting wires</big> |
− | {{{plugged_in|** a}}} | + | {{{plugged_in|** Wires should be connected while the module is not plugged in.}}} |
| :* Wires should be fastened to stable wires or other non-moving parts. Any heat emitting and/or moving objects should be kept away from the wires. | | :* Wires should be fastened to stable wires or other non-moving parts. Any heat emitting and/or moving objects should be kept away from the wires. |
| :* There should be no exposed wires. If factory isolation was removed while connecting wires, the isolation material should be applied. | | :* There should be no exposed wires. If factory isolation was removed while connecting wires, the isolation material should be applied. |
Line 28: |
Line 28: |
| **For better contact scrub paint from the spot where loop is going to be connected. | | **For better contact scrub paint from the spot where loop is going to be connected. |
| }}} | | }}} |
− | <br>
| + | {{{pay_attention|{{Template:Pay_attention|model={{{model|FMB2YX}}}}}}}} |
− | | |
− | {{Template:Pay_attention|model={{{model|FMB2YX}}}}} | |
− | | |
| }}} | | }}} |
| | | |
Line 43: |
Line 40: |
| *To avoid mechanical damage, it is advised to transport the device in an impact-proof package. {{{LED_indicators|Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.}}} | | *To avoid mechanical damage, it is advised to transport the device in an impact-proof package. {{{LED_indicators|Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.}}} |
| {{{FMB0_3_ignition|*Before unmounting the device from the vehicle, ignition '''MUST be OFF'''.}}} | | {{{FMB0_3_ignition|*Before unmounting the device from the vehicle, ignition '''MUST be OFF'''.}}} |
− | {{{connecting|* When connecting the {{{2x6_wires|2x6 connector wires to the vehicle}}} {{{1x5_wires|connection (1x5) cables to the vehicle}}}, the appropriate jumpers of the vehicle power supply should be disconnected.}}} | + | {{{connecting|* When connecting the {{{wires|wires}}}{{{2x6_wires|2x6 connector wires to the vehicle}}}{{{1x5_wires|connection (1x5) cables to the vehicle}}}, the appropriate jumpers of the vehicle power supply should be disconnected.}}} |
| {{{FMB2_connecting_cables|* When installing the connection cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected.}}} | | {{{FMB2_connecting_cables|* When installing the connection cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected.}}} |
| {{{unmounting|* Before unmounting the device from the vehicle, the {{{2x6_connector|2x6 connector}}} {{{1x5_connection|1x5 connection}}} must be disconnected.}}} | | {{{unmounting|* Before unmounting the device from the vehicle, the {{{2x6_connector|2x6 connector}}} {{{1x5_connection|1x5 connection}}} must be disconnected.}}} |
− | {{{zone_of_limited|* The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.}}} | + | {{{zone_of_limited|* The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.}}}<br> |
| {{{boats|* The device {{{model|FMB1YX}}} is not designed as a navigational device for boats.}}} | | {{{boats|* The device {{{model|FMB1YX}}} is not designed as a navigational device for boats.}}} |
| | | |