Changes

[[Image:DOUT Control via Ignition.png|{{{dout_control_via_ignition|size}}}|right]]

[[Image:DOUT Control via Ignition.png|{{{dout_control_via_ignition|size}}}|right]]

This feature allows to control the DOUT based on ignition. If enabled, ignition status starts to be monitored. Once it changes state from on to off and set timeout passes, selected DOUT (Digital Output) is turned on. <br/><br/>

This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once it the ignition changes state from On to Off after configured Ignition Off timeout, selected DOUT (Digital Output) will be turned On.<br/><br/>

Turning DOUT off is possible with a signal (voltage) applied to the configured DIN (Digital Input)<br/><br/>

Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requiraments: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/>

<table class="nd-othertables" style="width: 68%;">

<table class="nd-othertables" style="width: 68%;">