Changes

The other values will always be zero because there is no FMS data and the K-line is used for front download.

The other values will always be zero because there is no FMS data and the K-line is used for front download.

<br><br>

<br><br>

'''Tachograph''' is connected to FMB6 devices K-Line interface via Pin2 in front connector. <br>

'''Tachograph''' is connected to FMC6 devices K-Line interface via Pin2 in front connector. <br>

Next, the device is configured to upload DDD files via this connection. This lets the end user to remotely download DDD files using Web Tacho solution. '''Please note that in order for solution to work these requirements must be met:''' <br>

Next, the device is configured to upload DDD files via this connection. This lets the end user to remotely download DDD files using Web Tacho solution. '''Please note that in order for solution to work these requirements must be met:''' <br>

1. Siemens VDO Digital Tachograph - DTCO 1381 release version 1.3a, 1.4 or later tachograph must be used. <br>

1. Siemens VDO Digital Tachograph - DTCO 1381 release version 1.3a, 1.4 or later tachograph must be used. <br>

2. 24/7 remote download support (different than DDD file download from rear connector – the ignition is not required when downloading files via front interface) <br>

2. 24/7 remote download support (different than DDD file download from rear connector – the ignition is not required when downloading files via front interface) <br>

3. Easy to set up connection and configuration. <br>

3. Easy to set up connection and configuration. <br>

4. Both CAN lines of FMB6 devices (CAN1/CAN2) are left for other uses. <br>

4. Both CAN lines of FMC6 devices (CAN1/CAN2) are left for other uses. <br>

5. Tachograph live data available also available. <br>

5. Tachograph live data available also available. <br>

[[Category:FMC640 Manual]]

[[Category:FMC640 Manual]]