174
edits
Changes
Template:FMM640 CAN adapters (view source)
Revision as of 07:52, 26 August 2019
, 07:52, 26 August 2019no edit summary
|-
|-
|}
|}
==LV-CAN200 and ALL-CAN300 program number selection==
LV-CAN200 or ALL-CAN300 must be set to program number which depends on the vehicle model. '''Needed program number is always written on LV-CAN200 or ALL-CAN300 mounting scheme.''' Please contact Teltonika sales manager to get the latest supported vehicle list and mounting scheme for your vehicle providing information about car manufacturer, model and year.
===LV-CAN200 and ALL-CAN300 program number configuration via SMS command===
----
LV-CAN200 and ALL-CAN300 program number can be set remotely, using SMS command, where X is new program number value:<br/>''"lvcansetprog X"''<br/>
===Selecting LV-CAN200 and ALL-CAN300 program number manually===
----
[[Image:FMB640_adapter_led.png|300px|right]]
Steps to set program number:
* Hold SWITCH down until LED stars blinking.
* Release the SWITCH.
* Then LED starts blinking and counting first digit of program number (one blink means digit 1, two blinks mean digit 2 etc).
* To stop counter push SWITCH.
* Release the SWITCH, then LED starts blinking and counting second digit of program number.
* To stop counter push SWITCH.
* Release the SWITCH, then LED starts blinking and counting third digit on program number.
* To stop counter push SWITCH.
* Release SWITCH, if programming is successful LED will blink 10 times.
