Changes

no edit summary
Line 68: Line 68:  
** Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.
 
** Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.
 
* Accelerometer - after button is pressed, the device starts to capture accelerometer values for 1 second.
 
* Accelerometer - after button is pressed, the device starts to capture accelerometer values for 1 second.
* LLS calibration - in this section you can calculate calibration values of Analog LLS sensors for AVL server.
+
* LLS calibration - in this section you can calculate calibration values of Analog LLS sensors for AVL server - create a polynom which is needed to convert sensor values to liters:
 +
 
 +
:::Table is filled row by row. Each row represents one fuel tank fill. To calculate constants it is needed to select a sensor from „Available sensors“, and fill „Fuel, L.“ column and capture current value of a sensor by clicking "Refresh" button. Then the next value in liters should be entered by user and so on.
 +
:::When table is filled, calculated a0, a1, a2 and a3 values should be seen.
 +
:::To add a new tank fill row click "Add row". To remove the row click "minus" button near the row you want to clear. To Clear all the rows click "Clear rows".
 +
:::By clicking "Export" data will be exported to .csv file.
 +
:::To recalculate the polynom click on "Calculate" button.
 +
 
 +
[[File:LLS_Calibration.png]]
 +
 
 
   
 
   
 
Default log capture time, accelerometer capture time and files directories can be changed by pressing [[File:Configurator-settings.png|25px|link=]] icon at the bottom right corner.
 
Default log capture time, accelerometer capture time and files directories can be changed by pressing [[File:Configurator-settings.png|25px|link=]] icon at the bottom right corner.