Changes

*FMB1YX device, which is connected to the CAN adapter, must have a correct firmware version uploaded. Currently, this feature is only supported by firmware version 03.25.11.Rev142. Once device with correct firmware version connects to Fota Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), a small, blue, „CAN“ logo will appear next to the device‘s model:

*FMB1YX device, which is connected to the CAN adapter, must have a correct firmware version uploaded. Currently, this feature is only supported by firmware version 03.25.11.Rev142. Once device with correct firmware version connects to Fota Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), a small, blue, „CAN“ logo will appear next to the device‘s model:

[[Image:1I registered.jpg|1160x1160px|center]]

[[Image:11I registered.jpg|1160x1160px|center]]

<br />

<br />

*A current version of the CAN adapter software can be checked by pressing a small „i“ button on the right. All available details of both devices are listed in one window:

*A current version of the CAN adapter software can be checked by pressing a small „i“ button on the right. All available details of both devices are listed in one window:

[[Image:1FM OldDate.jpg|1162x1162px|center]]

[[Image:11FM OldDate.jpg|1162x1162px|center]]

<br />

<br />

*If the software is not up-to-date it can be updated in the previous window. A check-box needs to be ticked, then „Actions“ button pressed and „Update CAN adapter firmware“ selected:

*If the software is not up-to-date it can be updated in the previous window. A check-box needs to be ticked, then „Actions“ button pressed and „Update CAN adapter firmware“ selected:

[[File:1FMB120 + LV-CAN200 Fota details in progress.jpg|alt=|center|1159x1159px]]

[[File:11FMB120 + LV-CAN200 Fota details in progress.jpg|alt=|center|1159x1159px]]

<br />

<br />

*Once the software update task has been assigned, it can be seen in the main window:

*Once the software update task has been assigned, it can be seen in the main window:

[[Image:1FM Assigned.jpg|1155x1155px|center]]

[[Image:11FM Assigned.jpg|1155x1155px|center]]

<br />

<br />

*When the update is finished, a new software version can be seen in the details window:

*When the update is finished, a new software version can be seen in the details window:

[[Image:1FM Done.jpg|1162x1162px|center]]

[[Image:11FM Done.jpg|1162x1162px|center]]

<br />

<br />