0
edits
Changes
Template:FMB CAN adapters (view source)
Revision as of 08:50, 7 November 2019
, 08:50, 7 November 2019no edit summary
===CAN Adapter software update Over The Air===
===CAN Adapter software update Over The Air===
The software of CAN adapters [[LV-CAN200]], [[ALL-CAN300]] and [[CAN-CONTROL]] can now be updated Over The Air by using [[FOTA WEB]]. The feature is also supported by our fresh [[FMB140]] device which has a built-in CAN bus reading adapter. This is an excellent solution because a special cable is no longer needed and the software of the CAN adapter can be updated remotely, without having to dismount the CAN adapter from the vehicle. Upgrading the software of a CAN adapter will add more program numbers, thus, more vehicle models will be supported.
In order to update your device‘s firmware please follow a quick and simple step-by-step guide which is below. The procedure is the same for all devices.
In order to update your device‘s firmware please follow a quick and simple step-by-step guide which is below. The procedure is the same for all devices.
*FMB1YX device, which is connected to the CAN adapter (or [[FMB140]] which has internal CAN adapter), must be registered in Fota Web – device‘s model, firmware version, serial number and other information must be shown.
*FMB1YX device, which is connected to the CAN adapter (or [[FMB140]] which has internal CAN adapter), must be registered in Fota Web – device‘s model, firmware version, serial number and other information must be shown.
*A correct firmware version must be uploaded to the FMB1YX device. Currently this feature is only supported with firmware version 03.25.11.Rev141. If, firmware version is correct, a small, blue, „CAN“ logo will appear next to the device‘s model, once it connects to Fota Web:
*A correct firmware version must be uploaded to the FMB1YX device. Currently this feature is only supported with firmware version 03.25.11.Rev142. Once device with correct firmware version connects to Fota Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), a small, blue, „CAN“ logo will appear next to the device‘s model:
[[Image:I registered.jpg|1160x1160px|center]]
[[Image:111I registered.jpg|1160x1160px|center]]
*A current version of the CAN adapter version can be checked by pressing a small „i“ button on the right of fleet management device details. All FMB1YX device‘s and CAN adapter‘s details are listed in one window:
*A current version of the CAN adapter version can be checked by pressing a small „i“ button on the right of fleet management device details. All FMB1YX device‘s and CAN adapter‘s details are listed in one window:
[[Image:FM OldDate.jpg|1162x1162px|center]]
[[Image:111FM OldDate.jpg|1162x1162px|center]]
*If the software is not up-to-date it can be updated in the main window. A check-box needs to be ticked, then „Actions“ button pressed and „Update CAN adapter firmware“ selected:
*If the software is not up-to-date it can be updated in the main window. A check-box needs to be ticked, then „Actions“ button pressed and „Update CAN adapter firmware“ selected:
[[File:FMB120 + LV-CAN200 Fota details in progress.jpg|alt=|center|1159x1159px]]
[[File:111FMB120 + LV-CAN200 Fota details in progress.jpg|alt=|center|1159x1159px]]
*Once the software update task has been assigned, it can be seen in the main window:
*Once the software update task has been assigned, it can be seen in the main window:
[[Image:FM Assigned.jpg|1155x1155px|center]]
[[Image:111FM Assigned.jpg|1155x1155px|center]]
*When the update is finished, a new software version can be seen in the details window:
*When the update is finished, a new software version can be seen in the details window:
[[Image:FM Done.jpg|1162x1162px|center]]
[[Image:111FM Done.jpg|1162x1162px|center]]
===CAN Adapter State Flags===
===CAN Adapter State Flags===
