0
edits
Changes
Template:FMB Features settings (view source)
Revision as of 18:57, 28 February 2020
, 18:57, 28 February 2020no edit summary
[[Image:{{{model|FMB1YX}}}_Jamming.png|frameless|{{{jamming|size}}}|right]]
[[Image:{{{model|FMB1YX}}}_Jamming.png|frameless|{{{jamming|size}}}|right]]
When device detects GSM signal jamming, it activates the Jamming scenario. Device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If device regains GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle.
When device detects GSM signal jamming, it activates the Jamming scenario. Device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If device regains GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle.
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.
It can also be connected to the central lock system to ensure that all the doors are locked.
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.
'''Note that this scenario will not work with Deep Sleep, Ultra Deep Sleep and Online Deep Sleep modes, since they disable the device's GSM module to save power.'''
<span></span>
<br />''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise it will be appended only to eventual records. <br />{{{jamming_dout|info}}}
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />{{{template_link|}}}
{{{dout_control_via_call_feature|== DOUT Control Via Call==
[[Image:{{{model|FMB1YX}}}_DOUT_Control_Via_Call.png|{{{dout_control_via_call|size}}}|right]]
info
Scenario is activated and digital output is ON when call is received from a number which is on the authorized numbers list.<br/>
Call control functionality is following:
* When {{{model|FMB1YX}}} is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received {{{model|FMB1YX}}} turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to maximum value (2147483647) which is about 68 years.
{{{dout_control_dout|info}}}}}}
<br />
<br />
{{{immobilizer_feature|==Immobilizer==
[[File:FMB1YX_Immobilizer.png|right|size]]
[[Image:{{{model|FMB1YX}}}_Immobilizer.png|{{{immobilizer|size}}}|right]]
If ''DOUT Control'' is disabled, scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise immobilizer must be repeated. If ''iButton List Check'' parameter is enabled, authorization will be successful only if the attached iButton is specified in iButton list.<br/>{{{immobilizer_dout|info}}}
<br/><br/>
Ignition off timeout parameter is used to set the duration after which authorization is activated, when ignition is turned off. For example, if Ignition off timeout is set to 30 seconds, when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.
Ignition off timeout parameter is used to set the duration after which authorization is activated, when ignition is turned off. For example, if Ignition off timeout is set to 30 seconds, when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.
<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>}}}
{{{ibutton_feature|==iButton Read Notification==
[[Image:{{{model|FMB1YX}}}_iButton_Read_Notification.png|{{{ibutton_read_notification|size}}}|right]]
This functionality allows user to see when iButton is read. {{{text_dout|DOUT1/DOUT2}}} turns on for a configured duration and after DOUT ON duration ends {{{text_dout|DOUT1/DOUT2}}} does not turn on even if iButton is left attached.<br/>{{{ibutton_dout|info}}}
<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>}}}
This functionality allows user to see when iButton is read. DOUT1/DOUT2 turns on for a configured duration and after DOUT ON duration ends DOUT1/DOUT2 does not turn on even if iButton is left attached.info
==GNSS Fuel Counter==
==GNSS Fuel Counter==
