0
edits
Changes
FMB140 autoscan feature instructions (view source)
Revision as of 13:26, 20 March 2020
, 13:26, 20 March 2020no edit summary
Find the OBD-II port (diagnostic connector) in your vehicle. Connect the FMB140 CAN1L and CAN1H wires to OBD-II Connector PIN14 and PIN6 respectively.
Find the OBD-II port (diagnostic connector) in your vehicle. Connect the FMB140 CAN1L and CAN1H wires to OBD-II Connector PIN14 and PIN6 respectively.
'''Step 3.'''
'''Step 3.'''
[[File:Autoscan config.png|center|1151x1151px]]
After the connection is done successfully, launch the configurator and navigate to the CAN Adapter tab.
After the connection is done successfully, launch the configurator and navigate to CAN Adapter tab.
Before clicking the Scan button, make sure that ignition is ON. FMB140 configured ignition source should be DIN1 or Power Voltage.
Before clicking the Scan button, make sure that ignition is ON. FMB140 configured ignition source should be DIN1 or Power Voltage.
After pressing the scan button configurator will wait up to 60 seconds for device to send up to 9
After pressing the scan button configurator will wait up to 60 seconds for device to send up to 9
program numbers. If timeout is reached configurator will display an error.
program numbers. If timeout is reached configurator will display an error.
If no CAN bus connection is detected, configurator will return an error after pressing scan button.
If no CAN bus connection is detected, configurator will return an error after pressing the scan button.
After a successful scan, a list of compatible program numbers will be displayed. The first program number will be saved in device internal CAN chip and device configuration.
After a successful scan, a list of compatible program numbers will be displayed. The first program number will be saved in device internal CAN chip and device configuration.
You can try entering each of the scanned numbers into device configuration to see which parameters are available and which suggestion works best for the vehicle.
You can try entering each of the scanned numbers into device configuration to see which parameters are available and which suggestion works best for the vehicle.
