Changes

no edit summary
Line 12: Line 12:  
Operator search is performed every 15 minutes. Depending on current GSM operator Home, Roaming or Unknown mode can be changed faster than every 15 minutes. This process is separate from operator search. Movement criteria are checked every second.
 
Operator search is performed every 15 minutes. Depending on current GSM operator Home, Roaming or Unknown mode can be changed faster than every 15 minutes. This process is separate from operator search. Movement criteria are checked every second.
   −
{{{fmb_picture|[[Image:Fmb120_daq_mode_config.png|800px|none]]}}}<br/>
+
{{{fmb_picture|[[Image:Fmb120 data acquisition config.png|800px|none]]}}}<br/>
    
''Min Saved Records'' defines minimum number of coordinates and I/O data that should be transferred within a single connection to the server. If {{{model|FMB1YX}}} does not have enough coordinates to send to the server, it will check again after a time interval defined in ''Send Period'' field.<br/>''Send period'' controls the frequency of data being sent to server over GPRS. Module makes attempts to send collected data to the server every defined period of time. If it does not have enough records (depends on the parameter ''Min. Saved Records'' described above), it tries again after the defined time interval.
 
''Min Saved Records'' defines minimum number of coordinates and I/O data that should be transferred within a single connection to the server. If {{{model|FMB1YX}}} does not have enough coordinates to send to the server, it will check again after a time interval defined in ''Send Period'' field.<br/>''Send period'' controls the frequency of data being sent to server over GPRS. Module makes attempts to send collected data to the server every defined period of time. If it does not have enough records (depends on the parameter ''Min. Saved Records'' described above), it tries again after the defined time interval.
Line 30: Line 30:     
[[Image:Fmb120_daq_mode_basis.png|800px|none]]
 
[[Image:Fmb120_daq_mode_basis.png|800px|none]]
 +
 +
==On Demand Tracking==
 +
 +
This functionality was made global (for all FMB devices) from 03.25.06.Rev.00. Tracking on Demand can be activated using commands. After device receives [[FMB SMS/GPRS Commands|SMS/GPRS]] command "''  [[FMB SMS/GPRS Commands#Commands Related to Features|on_demand_trackingX]]''" where ''X'' is a number from 0 to 2.
 +
 +
Possible X values are:
 +
 +
*X = 0 – Stops Tracking on Demand functionality.
 +
*X = 1 – Starts Tracking on Demand functionality.
 +
*X = 2 – Generates one high priority record and initiates data sending to server.
 +
 +
After that, device starts to generate high priority records and initiate data sending to server. This
 +
feature is configurable via [[FMB SMS/GPRS Commands|SMS/GPRS]] commands only.<br />
 +
 +
From version 03.25.11.Rev.00 tracking on demand can be triggered by multiple IO Events. To enable functionality at least one activation source must be selected and appropriate IO Event (in I/O tab) should be enabled (Low/High/Panic priority, operand must NOT be “Monitoring”). When IO Event is generated and if the event is enabled in activation sources, tracking on demand will be started. New IO event will not interrupt or restart tracking on demand until Duration period has expired. If tracking on demand is already running, SMS/GPRS command will restart tracking on demand.
 +
If tracking on demand period is lower than normal record acquisition period, only high priority records will be created. If tracking on demand period is larger than normal record acquisition period, low priority records will be created according to data acquisition configuration and high priority record will be created after configured tracking on demand period. Some new [[Template:FMB_Device_Family_Parameter_list#Tracking_on_Demand|Tracking on Demand parameters]] are introduced in devices.
 +
 +
[[image:On demand Tracking.gif]]
 +
 +
There are three available options for the activation source of tracking on demand - DIN/AIN or both (devices that support multiple DINs/AINs allow choosing which DINs/AINs to use). Note that, these inputs will work as buttons, rather than switches and are used to trigger the functionality, the duration of tracking on demand will not be extended if the activation source status is high for a period of time.

Navigation menu