Changes

Template:FMB CAN adapters (view source)

Revision as of 13:18, 27 July 2020

268 bytes added , 13:18, 27 July 2020

→‎CAN Adapter software update Over The Air

Line 1: Line 1:

Easy steps to install and configure following CAN adapters on {{{model|FMB1YX}}} device:

−

* [[LV-CAN200]]

+

−

* [[ALL-CAN300]]

+

*[[LV-CAN200]]

−

* [[CAN-CONTROL]]

+

*[[ALL-CAN300]]

−

* [[SIMPLE-CAN]]

+

*[[CAN-CONTROL]]

−

* [[MINI-CAN]]

+

*[[SIMPLE-CAN]]

+

*[[MINI-CAN]]

__TOC__

Line 13: Line 14:

You can watch [[LV-CAN200]]/[[ALL-CAN300]] installation video in our YouTube channel [https://youtu.be/V9RTdSy1E8w '''here'''] or follow connection instructions below.

====Tools needed for installation====

−

* [[LV-CAN200]]/[[ALL-CAN300]]/[[CAN-CONTROL]]

+

−

* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.

+

*[[LV-CAN200]]/[[ALL-CAN300]]/[[CAN-CONTROL]]

−

* {{{model|FMB1YX}}} device

+

*Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.

−

* Pliers

+

*{{{model|FMB1YX}}} device

−

* Quick splice connectors (If vehicle CAN bus wires are very thin CAN adapter wires should be connected directly)

+

*Pliers

−

* Plastic pry tool

+

*Quick splice connectors (If vehicle CAN bus wires are very thin CAN adapter wires should be connected directly)

−

* Zip ties

+

*Plastic pry tool

+

*Zip ties

====Installation steps====

−

# Be ready with a vehicle '''connection scheme''' that you have received from a Teltonika Sales Representative.

+

−

# '''Check the scheme''' for the current vehicle connection. Look for connectors matching '''PINs numbers''' and colors (may be different) according to connection scheme.

+

#Be ready with a vehicle '''connection scheme''' that you have received from a Teltonika Sales Representative.

−

# Connect CAN adapter with {{{model|FMB1YX}}}:

+

#'''Check the scheme''' for the current vehicle connection. Look for connectors matching '''PINs numbers''' and colors (may be different) according to connection scheme.

−

## Connect CAN adapter '''PIN 6''' '''(Rx)''' to '''INPUT 6''' of {{{model|FMB1YX}}}.

+

#Connect CAN adapter with {{{model|FMB1YX}}}:

−

## Connect CAN adapter '''PIN 5''' '''(Tx)''' to '''INPUT 5''' of {{{model|FMB1YX}}}.

+

##Connect CAN adapter '''PIN 6''' '''(Rx)''' to '''INPUT 6''' of {{{model|FMB1YX}}}.

−

# Connect CAN adapter '''CAN wires (CAN L, CAN H)''' as specified in connection scheme.<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap CAN L and CAN H lines. Not all CAN adapter wires may be used in vehicle.</td></table>

+

##Connect CAN adapter '''PIN 5''' '''(Tx)''' to '''INPUT 5''' of {{{model|FMB1YX}}}.

−

# Connect CAN adapter '''positive''' and '''ground''' wires to the vehicle power supply lines or near {{{model|FMB1YX}}} power wires.<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap power supply lines. Make sure that voltage does not exceed 30V.</td></table>

+

#Connect CAN adapter '''CAN wires (CAN L, CAN H)''' as specified in connection scheme.<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap CAN L and CAN H lines. Not all CAN adapter wires may be used in vehicle.</td></tr></table>

−

# Switch vehicle '''ignition to ACC''' position. CAN adapter '''LED diode''' on the back should start '''blinking'''.

+

#Connect CAN adapter '''positive''' and '''ground''' wires to the vehicle power supply lines or near {{{model|FMB1YX}}} power wires.<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap power supply lines. Make sure that voltage does not exceed 30V.</td></tr></table>

−

# Configure CAN adapter to read CAN bus data or control vehicle by setting its '''program number''' - [[{{{model|FMB1YX}}}_CAN_adapters#CAN_Adapter_Configuration|CAN Adapter configuration]]

+

#Switch vehicle '''ignition to ACC''' position. CAN adapter '''LED diode''' on the back should start '''blinking'''.

+

#Configure CAN adapter to read CAN bus data or control vehicle by setting its '''program number''' - [[{{{model|FMB1YX}}}_CAN_adapters#CAN_Adapter_Configuration|CAN Adapter configuration]]

+

[[File:CAN_adapter_connection_example_updated.png|1000px|none|thumb|LV-CAN200/ALL-CAN300 connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]

Line 39: Line 43:

You can watch [[LV-CAN200]]/[[ALL-CAN300]] + [[SIMPLE-CAN]] installation video in our YouTube channel [https://youtu.be/V9RTdSy1E8w?t=356 '''here'''] or follow connection instructions below.

====Tools needed for installation====

−

* [[LV-CAN200]]/[[ALL-CAN300]]

+

−

* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.

+

*[[LV-CAN200]]/[[ALL-CAN300]]

−

* [[SIMPLE-CAN]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''two SIMPLE-CAN's''' must be used.)

+

*Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.

−

* {{{model|FMB1YX}}} device

+

*[[SIMPLE-CAN]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''two SIMPLE-CAN's''' must be used.)

−

* Pliers

+

*{{{model|FMB1YX}}} device

−

* Quick splice connectors (If vehicle CAN bus wires are very thin CAN adapter wires should be connected directly)

+

*Pliers

−

* Plastic pry tool

+

*Quick splice connectors (If vehicle CAN bus wires are very thin CAN adapter wires should be connected directly)

−

* Zip ties

+

*Plastic pry tool

+

*Zip ties

====Installation steps====

−

# Follow the same '''1, 2, 3''' installation steps as with [[{{{model|FMB1YX}}}_CAN_adapters#Installation_steps| LV-CAN200/ALL-CAN300/CAN-CONTROL installation]].

+

−

# Connect the appropiate CAN bus pair of wires between CAN adapter and [[SIMPLE-CAN]]:

+

#Follow the same '''1, 2, 3''' installation steps as with [[{{{model|FMB1YX}}}_CAN_adapters#Installation_steps| LV-CAN200/ALL-CAN300/CAN-CONTROL installation]].

−

#: If '''CAN1 line''' need to be connected as specified in connection scheme:

+

#Connect the appropiate CAN bus pair of wires between CAN adapter and [[SIMPLE-CAN]]:

−

## Connect CAN adapter '''CAN1 L''' to '''CAN L''' of [[SIMPLE-CAN]].

+

#:If '''CAN1 line''' need to be connected as specified in connection scheme:

−

## Connect CAN adapter '''CAN1 H''' to '''CAN H''' of [[SIMPLE-CAN]].

+

##Connect CAN adapter '''CAN1 L''' to '''CAN L''' of [[SIMPLE-CAN]].

−

#: If '''CAN2 line''' need to be connected as specified in connection scheme:

+

##Connect CAN adapter '''CAN1 H''' to '''CAN H''' of [[SIMPLE-CAN]].

−

## Connect CAN adapter '''CAN2 L''' to '''CAN L''' of [[SIMPLE-CAN]].

+

#:If '''CAN2 line''' need to be connected as specified in connection scheme:

−

## Connect CAN adapter '''CAN2 H''' to '''CAN H''' of [[SIMPLE-CAN]].<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap CAN L and CAN H lines. Not all CAN adapter wires may be used in vehicle.</td></table>

+

##Connect CAN adapter '''CAN2 L''' to '''CAN L''' of [[SIMPLE-CAN]].

−

# Fasten [[SIMPLE-CAN]] '''between vehicle CAN bus wires''' according to the connection scheme. '''It doeasn't matter which wire is on which side.'''[[File:SIMPLE-CAN_connection.gif|none]]

+

##Connect CAN adapter '''CAN2 H''' to '''CAN H''' of [[SIMPLE-CAN]].<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap CAN L and CAN H lines. Not all CAN adapter wires may be used in vehicle.</td></tr></table>

−

# Connect CAN adapter '''positive''' and '''ground''' wires to the vehicle power supply lines or near {{{model|FMB1YX}}} power wires.<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap power supply lines. Make sure that voltage does not exceed 30V.</td></table>

+

#Fasten [[SIMPLE-CAN]] '''between vehicle CAN bus wires''' according to the connection scheme. '''It doeasn't matter which wire is on which side.'''[[File:SIMPLE-CAN_connection.gif|none]]

−

# Switch vehicle '''ignition to ACC''' position.

+

#Connect CAN adapter '''positive''' and '''ground''' wires to the vehicle power supply lines or near {{{model|FMB1YX}}} power wires.<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap power supply lines. Make sure that voltage does not exceed 30V.</td></tr></table>

−

# [[SIMPLE-CAN]] '''LED will shine continously''' so device awaits for '''calibration'''.<div><ul><li style="display: inline-block;">[[File:SIMPLE-CAN_calibration.gif|none|thumb|'''Press the switch shortly''' and wait for the LED to start blinking '''every one second'''. ]]</li><li style="display: inline-block;">[[File:SIMPLE-CAN after calibration.gif|none|thumb|Automatic calibration process takes up to 10 seconds depending on the vehicle model. Device is calibrated properly then the LED is blinking '''every 2 seconds'''.]]</li></ul></div><table><td>[[File:Alert.png|50px|left|link=]]</td><td>If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.</td></table>

+

#Switch vehicle '''ignition to ACC''' position.

−

# Configure CAN adapter to read CAN bus data by setting its '''program number''' - [[{{{model|FMB1YX}}}_CAN_adapters#CAN_Adapter_Configuration|CAN Adapter configuration]]

+

#[[SIMPLE-CAN]] '''LED will shine continously''' so device awaits for '''calibration'''.<div><ul><li style="display: inline-block;">[[File:SIMPLE-CAN_calibration.gif|none|thumb|'''Press the switch shortly''' and wait for the LED to start blinking '''every one second'''. ]]</li><li style="display: inline-block;">[[File:SIMPLE-CAN after calibration.gif|none|thumb|Automatic calibration process takes up to 10 seconds depending on the vehicle model. Device is calibrated properly then the LED is blinking '''every 2 seconds'''.]]</li></ul></div><table><td>[[File:Alert.png|50px|left|link=]]</td><td>If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.</td></tr></table>

+

#Configure CAN adapter to read CAN bus data by setting its '''program number''' - [[{{{model|FMB1YX}}}_CAN_adapters#CAN_Adapter_Configuration|CAN Adapter configuration]]

+

[[File:Can_adapter%2Bsimple-can_connection_example_updated.png|1000px|none|thumb|LV-CAN200/ALL-CAN300 + SIMPLE-CAN connection example. This is not a connection diagram for your vehicle. Follow LV-CAN200/ALL-CAN300 connection scheme suitable for your vehicle.]]

Line 71: Line 78:

CAN Adapter must be set to program number which depends on the vehicle model. '''Needed program number is always written on CAN Adapter mounting scheme.''' In order to be able to enter program number in adapter '''Software date of CAN adapter must be newer than connection scheme date'''.

CAN adapter Software date can be checked:

−

* Via [[{{{model|FMB1YX}}}_Status_info#CAN_Adapter_Info|Teltonika Configurator→Status→CAN Adapter]]

+

−

* Via SMS command - [[FMB_lvcangetinfo|lvcangetinfo]]

+

*Via [[{{{model|FMB1YX}}}_Status_info#CAN_Adapter_Info|Teltonika Configurator→Status→CAN Adapter]]

+

*Via SMS command - [[FMB_lvcangetinfo|lvcangetinfo]]

The number of digits required to enter correct Program No. may vary depending on the Software and manufacture date of your CAN Adapter:

−

* [[LV-CAN200#Adapter_changes|LV-CAN200 adapter changes]]

+

−

* [[ALL-CAN300#Adapter_changes|ALL-CAN300 adapter changes]]

+

*[[LV-CAN200#Adapter_changes|LV-CAN200 adapter changes]]

+

*[[ALL-CAN300#Adapter_changes|ALL-CAN300 adapter changes]]

====Entering via SMS command====

----

Required conditions:

−

* CAN adapter properly connected to {{{model|FMB1YX}}} device

+

*CAN adapter properly connected to {{{model|FMB1YX}}} device

CAN adapter program number can be set remotely, using SMS command.

Send following '''SMS command''' to {{{model|FMB1YX}}} device:

−

* If you have set SMS login and password: <code>login pass lvcansetprog X</code>

+

−

* If SMS login and password are not set leave two spaces before command: <code>  lvcansetprog X</code>

+

*If you have set SMS login and password: <code>login pass lvcansetprog X</code>

+

*If SMS login and password are not set leave two spaces before command: <code>  lvcansetprog X</code>

+

Command example: <code>  lvcansetprog 11434</code>

SMS response: <code>LVCAN ProgNum: 11434</code>

If during SMS command {{{model|FMB1YX}}} was in following Sleep mode:

−

* [[{{{model|FMB1YX}}}_Sleep_modes#GPS_Sleep_mode|GPS Sleep]] - Program No. will be set immediately.

+

−

* [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]] - Program No. will be set after device wake up.

+

*[[{{{model|FMB1YX}}}_Sleep_modes#GPS_Sleep_mode|GPS Sleep]] - Program No. will be set immediately.

−

* [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] - Program No. will be set immediately.

+

*[[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]] - Program No. will be set after device wake up.

−

* [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] - Program No. will be set after device wake up.

+

*[[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] - Program No. will be set immediately.

+

*[[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] - Program No. will be set after device wake up.

====Entering via Teltonika Configurator====

----

Required conditions:

−

* CAN adapter properly connected to {{{model|FMB1YX}}} device

+

*CAN adapter properly connected to {{{model|FMB1YX}}} device

CAN adapter program number can be set via '''[[Teltonika Configurator]] → (1) CAN Adapter → (2) Program Number'''. When program number is entered press [[File:Save_to_device.png|25px|link=]] '''(3) Save to device''' button that saves the entered program number into {{{model|FMB1YX}}}.

−

+

[[Image:Can adapter conf.png|700px]]

−

+

====Entering manually====

----

Required conditions:

−

* CAN adapter properly connected to {{{model|FMB1YX}}} device

+

−

* Vehicle ignition must be ON

+

*CAN adapter properly connected to {{{model|FMB1YX}}} device

+

*Vehicle ignition must be ON

Depending on used CAN Adapter, length of setup sequence will vary.

Line 116: Line 131:

{| class="wikitable" style="width:70%;"

−

|+

+

|+

|-

−

| rowspan="5" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" | For ALL-CAN300 LV-CAN200 3 digit

+

| rowspan="5" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" |For ALL-CAN300 LV-CAN200 3 digit

−

| rowspan="6" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" | For ALL-CAN300 LV-CAN200 4 digit

+

| rowspan="6" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" |For ALL-CAN300 LV-CAN200 4 digit

−

| rowspan="7" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:11%;" | For LV-CAN200 CAN-CONTROL 5 digit

+

| rowspan="7" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:11%;" |For LV-CAN200 CAN-CONTROL 5 digit

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white; width:38%;" |1. Hold SWITCH down until LED stars blinking.

|-

Line 134: Line 149:

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |6. Release the SWITCH, then LED starts blinking and counting fourth digit on program number. To stop counter, push SWITCH.

|-

−

| style="border: 1px solid white; border-bottom: 1px solid #0054A6; background: white;" |

+

| style="border: 1px solid white; border-bottom: 1px solid #0054A6; background: white;" |

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |7. Release the SWITCH, then LED starts blinking and counting fifth digit on program number. To stop counter, push SWITCH.

|-

−

| colspan="3" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center;" | All Devices

+

| colspan="3" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center;" |All Devices

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |8. Release SWITCH, if programming is successful LED will blink 10 times.

|}

Line 144: Line 159:

----

====Teltonika Configurator====

−

CAN Adapter configuration can be performed using [[Teltonika Configurator]] via '''Micro-USB cable''' or '''Bluetooth connection''' when CAN Adapter is connected to the vehicle.

+

CAN Adapter configuration can be performed using [[Teltonika Configurator]] via '''Micro-USB cable''' or '''Bluetooth connection''' when CAN Adapter is connected to the vehicle.

−

When {{{model|FMB1YX}}} is connected to the CAN Adapter, user can see all information that is received from the vehicle in [[Teltonika Configurator]]''' → Status → CAN Adapter''' tab or [[Teltonika Configurator]]''' → CAN Adapter''' section. In '''Status → CAN Adapter''' tab you can see information about CAN adapter and its readable parameters. In '''CAN Adapter''' section you can configure CAN Adapter and see incoming CAN bus data highlighted by '''green''' background color. Incoming data in both sections is automatically refreshed every 5 seconds. CAN bus data which should be readable from your vehicle is provided in "CAN Adapter supported vehicles list", which you can get from Teltonika Sales Representative.

+

When {{{model|FMB1YX}}} is connected to the CAN Adapter, user can see all information that is received from the vehicle in [[Teltonika Configurator]]''' → Status → CAN Adapter''' tab or [[Teltonika Configurator]]''' → CAN Adapter''' section. In '''Status → CAN Adapter''' tab you can see information about CAN adapter and its readable parameters. In '''CAN Adapter''' section you can configure CAN Adapter and see incoming CAN bus data highlighted by '''green''' background color. Incoming data in both sections is automatically refreshed every 5 seconds. CAN bus data which should be readable from your vehicle is provided in "CAN Adapter supported vehicles list", which you can get from Teltonika Sales Representative.

The CAN Adapter I/O element can be configured like any other I/O element in [[Teltonika Configurator]]. All information about I/O element parameters description is in section [[{{{model|FMB1YX}}} I/O settings|I/O settings]].

Line 158: Line 173:

{| class="wikitable" style="width:40%;"

|+

−

! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | CAN Adapter I/O element

+

! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CAN Adapter I/O element

−

! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | Status

+

! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Status

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Vehicle Speed

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Vehicle Speed

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |reset

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Accelerator pedal position

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Accelerator pedal position

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |reset

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Total fuel used

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Total fuel used

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Fuel level (liters)

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Fuel level (liters)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Engine RPM

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Engine RPM

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |reset

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Total mileage

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Total mileage

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Fuel level (%)

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Fuel level (%)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Program number

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Program number

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Module ID

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Module ID

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Engine Work Time

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Engine Work Time

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Engine Work Time (counted)

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Engine Work Time (counted)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Total Mileage (counted)

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Total Mileage (counted)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Fuel Consumed (counted)

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Fuel Consumed (counted)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Fuel Rate

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Fuel Rate

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |reset

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Program number

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Program number

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | AdBlue Level (%)

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |AdBlue Level (%)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | AdBlue Level (liters)

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |AdBlue Level (liters)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Engine Load

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Engine Load

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |reset

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Engine Temperature

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Engine Temperature

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Axle 1 Load

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Axle 1 Load

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Axle 2 Load

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Axle 2 Load

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Axle 3 Load

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Axle 3 Load

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Axle 4 Load

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Axle 4 Load

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Axle 5 Load

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Axle 5 Load

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Control State Flags

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Control State Flags

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Agricultural Machinery Flags

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Agricultural Machinery Flags

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Harvesting Time

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Harvesting Time

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Area of Harvest

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Area of Harvest

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |reset

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Mowing Efficiency

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Mowing Efficiency

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Grain Mown Volume

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Grain Mown Volume

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Grain Moisture

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Grain Moisture

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Harvesting Drum RPM

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Harvesting Drum RPM

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |reset

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Gap Under Harvesting Drum

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Gap Under Harvesting Drum

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Security State Flags

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Security State Flags

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Tachograph Total Vehicle Distance

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Tachograph Total Vehicle Distance

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lock

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Trip Distance

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Trip Distance

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |reset

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Tachograph Vehicle Speed

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Tachograph Vehicle Speed

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |reset

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Tachograph Driver Card Presence

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Tachograph Driver Card Presence

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver1 States

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver1 States

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver2 States

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver2 States

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver1 Continuous Driving Time

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver1 Continuous Driving Time

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver2 Continuous Driving Time

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver2 Continuous Driving Time

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver1 Cumulative Break Time

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver1 Cumulative Break Time

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver2 Cumulative Break Time

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver2 Cumulative Break Time

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver1 Selected Activity Duration

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver1 Selected Activity Duration

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver2 Selected Activity Duration

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver2 Selected Activity Duration

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver1 Cumulative Driving Time

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver1 Cumulative Driving Time

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver2 Cumulative Driving Time

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver2 Cumulative Driving Time

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |active

|-

|}

Line 318: Line 333:

SMS command [[FMB lvcangetinfo|lvcangetinfo]] example:

−

* If you have set SMS login and password: <code>login pass lvcangetinfo</code>

+

−

* If SMS login and password are not set leave two spaces before command: <code>aalvcangetinfo</code>

+

*If you have set SMS login and password: <code>login pass lvcangetinfo</code>

+

*If SMS login and password are not set leave two spaces before command: <code>aalvcangetinfo</code>

+

GPRS commands require [[Codec 12]] protocol.

Line 327: Line 344:

{| class="wikitable" style="width:80%;"

|+

−

! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | COMMAND

+

! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |COMMAND

−

! style="width: 65%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION

+

! style="width: 65%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |DESCRIPTION

−

! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | RESPONSE

+

! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |RESPONSE

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcansetprog #

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lvcansetprog #

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Set program number to CAN Adapter that is connected to {{{model|FMB1YX}}}. # - three digit number that identity vehicle.

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Set program number to CAN Adapter that is connected to {{{model|FMB1YX}}}. # - three digit number that identity vehicle.

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Yes

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcansimpletacho #

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lvcansimpletacho #

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Add or remove simpletacho start byte. # - 0 or 1 (0 – don’t add start byte, 1 – add start byte).

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Add or remove simpletacho start byte. # - 0 or 1 (0 – don’t add start byte, 1 – add start byte).

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | No

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |No

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcangetprog

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lvcangetprog

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Get program number from CAN Adapter that is connected to {{{model|FMB1YX}}}.

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Get program number from CAN Adapter that is connected to {{{model|FMB1YX}}}.

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Yes

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[FMB lvcangetinfo|lvcangetinfo]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[FMB lvcangetinfo|lvcangetinfo]]

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Get information about connected CAN Adapter

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Get information about connected CAN Adapter

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Yes

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[FMB_lvcanclear|lvcanclear #]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[FMB_lvcanclear|lvcanclear #]]

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values. # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values. # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Yes

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | allcanmode

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |allcanmode

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Turn on ALL-CAN300 mode.

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Turn on ALL-CAN300 mode.

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Yes

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcanmode

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lvcanmode

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Turn on LV-CAN200 mode.

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Turn on LV-CAN200 mode.

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Yes

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[FMB_lvcanfaultcodes|lvcanfaultcodes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[FMB_lvcanfaultcodes|lvcanfaultcodes]]

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Read DTC fault codes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Read DTC fault codes

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Yes

|-

−

| colspan="3" style="border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | '''CAN-CONTROL specific commands'''

+

| colspan="3" style="border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |'''CAN-CONTROL specific commands'''

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcanopenalldoors

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lvcanopenalldoors

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Open [unlock] all doors

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Open [unlock] all doors

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Yes

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcanclosealldoors

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lvcanclosealldoors

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Close [lock] all doors

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Close [lock] all doors

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Yes

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcanopentrunk

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lvcanopentrunk

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Open [unlock] trunk

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Open [unlock] trunk

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Yes

|-

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcanturninglights

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |lvcanturninglights

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | One flash of all turn lights ordered trough accidental / blinking turn light switch

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |One flash of all turn lights ordered trough accidental / blinking turn light switch

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Yes

|-

<!-- | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcanwindowsopen:#

Line 400: Line 417:

*FMB1YX device, which is connected to the CAN adapter (or [[FMB140]] which has internal CAN adapter), must be registered in Fota Web – device‘s model, firmware version, serial number and other information must be shown.

−

*A correct firmware version must be uploaded to the FMB1YX device. Currently this feature is ~~only~~ supported with firmware version 03.25.11.~~Rev144~~. Once device with correct firmware version connects to Fota Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), a small, blue, „CAN“ logo will appear next to the device‘s model:

+

*A correct firmware version must be uploaded to the FMB1YX device. Currently this feature is supported with base firmware since version '''[[FMB140 firmware errata|03.25.15.Rev.143]]'''. Once device with correct firmware version connects to Fota Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), a small, blue, „CAN“ logo will appear next to the device‘s model:

[[Image:111I registered.jpg|1160x1160px|center]]

Line 428: Line 445:

----

CAN Adapters receive data about the states of various systems within the vehicle, and send them as flags to {{{model|FMB1YX}}}. {{{model|FMB1YX}}} device stores these flags in hexadecimal format, as one variable. Bellow is a list of kept flags and how to retrieve them. The full list of state flags is stored only by:

−

* [[ALL-CAN300]]

+

*[[ALL-CAN300]]

+

Only '''security state flags''' and '''control state flags''' are stored by:

−

* [[CAN-CONTROL]]

+

*[[CAN-CONTROL]]

{| class="wikitable" style="width:70%;"

|+

−

! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | Property name

+

! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Property name

−

! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | Size, bytes

+

! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Size, bytes

−

! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | Value bitmasks

+

! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Value bitmasks

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"| Control state flags

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Control state flags

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 4

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |4

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Byte0 (LSB):

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Byte0 (LSB):

−

0x01 – STOP

+

0x01 – STOP

−

0x02 – Oil pressure / level

+

0x02 – Oil pressure / level

−

0x04 – Coolant liquid temperature / level

+

0x04 – Coolant liquid temperature / level

−

0x08 – Handbrake system

+

0x08 – Handbrake system

−

0x10 – Battery not charging

+

0x10 – Battery not charging

−

0x20 – AIRBAG

+

0x20 – AIRBAG

−

0x40 – EPS (Electric power steering)

+

0x40 – EPS (Electric power steering)

−

0x80 – ESP (Electronic Stability Program)

+

0x80 – ESP (Electronic Stability Program)

−

Byte1:

+

Byte1:

−

0x01 – CHECK ENGINE

+

0x01 – CHECK ENGINE

−

0x02 – Lights failure

+

0x02 – Lights failure

−

0x04 – Low tire pressure

+

0x04 – Low tire pressure

−

0x08 – Wear of brake pads

+

0x08 – Wear of brake pads

−

0x10 – Warning

+

0x10 – Warning

−

0x20 – ABS

+

0x20 – ABS

−

0x40 – Low Fuel

+

0x40 – Low Fuel

−

0x80 – Maintenance required

+

0x80 – Maintenance required

−

Byte2:

+

Byte2:

−

0x01 – ESP

+

0x01 – ESP

−

0x02 – Glow plug indicator

+

0x02 – Glow plug indicator

−

0x04 – FAP

+

0x04 – FAP

−

0x08 – Electronics pressure control

+

0x08 – Electronics pressure control

−

0x10 – Parking lights

+

0x10 – Parking lights

−

0x20 – Dipped headlights

+

0x20 – Dipped headlights

−

0x40 – Full beam headlights

+

0x40 – Full beam headlights

−

0x80 – Front foglights

+

0x80 – Front foglights

−

Byte3:

+

Byte3:

−

0x01 – Ready to drive

+

0x01 – Ready to drive

−

0x02 – Cruise control

+

0x02 – Cruise control

−

0x04 – Automatic Retarder

+

0x04 – Automatic Retarder

−

0x08 – Manual retarder

+

0x08 – Manual retarder

−

0x10 – Air Conditioning

+

0x10 – Air Conditioning

−

0x20 – Rear foglights

+

0x20 – Rear foglights

−

0x40 – Passenger's seat belt

+

0x40 – Passenger's seat belt

−

0x80 – Driver's seat belt

+

0x80 – Driver's seat belt

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Agricultural machinery flags

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Agricultural machinery flags

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 8

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |8

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"| Byte0 (LSB):

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Byte0 (LSB):

−

0x01 – Mowing

+

0x01 – Mowing

−

0x02 – Grain release from hopper

+

0x02 – Grain release from hopper

−

0x04 – First front hydraulic turned on

+

0x04 – First front hydraulic turned on

−

0x08 – Rear Power Take-Off turned on

+

0x08 – Rear Power Take-Off turned on

−

Byte1: 0x01 – Excessive play under the threshing drum

+

Byte1: 0x01 – Excessive play under the threshing drum

−

0x02 – Grain tank is open

+

0x02 – Grain tank is open

−

0x04 – 100% of Grain tank

+

0x04 – 100% of Grain tank

−

0x08 – 70% of Grain tank

+

0x08 – 70% of Grain tank

−

0x10 – Drain filter in hydraulic system of drive cylinders is plugged

+

0x10 – Drain filter in hydraulic system of drive cylinders is plugged

−

0x20 – Pressure filter of drive cylinders hydraulic system is plugged

+

0x20 – Pressure filter of drive cylinders hydraulic system is plugged

−

0x40 – Alarm oil level in oil tank

+

0x40 – Alarm oil level in oil tank

−

0x80 – Pressure filter of brakes hydraulic system is plugged

+

0x80 – Pressure filter of brakes hydraulic system is plugged

−

Byte2: 0x01 – Oil filter of engine is plugged

+

Byte2: 0x01 – Oil filter of engine is plugged

−

0x02 – Fuel filter is plugged

+

0x02 – Fuel filter is plugged

−

0x04 – Air filter is plugged

+

0x04 – Air filter is plugged

−

0x08 – Alarm oil temperature in hydraulic system of chassis

+

0x08 – Alarm oil temperature in hydraulic system of chassis

−

0x10 – Alarm oil temperature in hydraulic system of drive cylinders

+

0x10 – Alarm oil temperature in hydraulic system of drive cylinders

−

0x20 – Alarm oil pressure in engine

+

0x20 – Alarm oil pressure in engine

−

0x40 – Alarm coolant level

+

0x40 – Alarm coolant level

−

0x80 – Overflow chamber of hydraulic unit

+

0x80 – Overflow chamber of hydraulic unit

−

Byte3: 0x01 – Unloader drive is ON. Unloading tube pivot is in idle position

+

Byte3: 0x01 – Unloader drive is ON. Unloading tube pivot is in idle position

−

0x02 – No operator!

+

0x02 – No operator!

−

0x04 – Straw walker is plugged

+

0x04 – Straw walker is plugged

−

0x08 – Water in fuel

+

0x08 – Water in fuel

−

0x10 – Cleaning fan RPM

+

0x10 – Cleaning fan RPM

−

0x20 – Trashing drum RPM

+

0x20 – Trashing drum RPM

−

0x40 – Pouring chemicals turned on

+

0x40 – Pouring chemicals turned on

−

0x80 – Conveyor belt turned on

+

0x80 – Conveyor belt turned on

−

Byte4:

+

Byte4:

−

0x01 – Salt spreaders drive wheel turned on

+

0x01 – Salt spreaders drive wheel turned on

−

0x02 – Low water level in the tank

+

0x02 – Low water level in the tank

−

0x04 – First rear hydraulic turned on

+

0x04 – First rear hydraulic turned on

−

0x08 – Standalone engine working

+

0x08 – Standalone engine working

−

0x10 – Right joystick moved right

+

0x10 – Right joystick moved right

−

0x20 – Right joystick moved left

+

0x20 – Right joystick moved left

−

0x40 – Right joystick moved front

+

0x40 – Right joystick moved front

−

0x80 – Right joystick moved back

+

0x80 – Right joystick moved back

−

+

−

Byte5:

+

Byte5:

−

0x01 – Brushes turned on

+

0x01 – Brushes turned on

−

0x02 – Water supply turned on

+

0x02 – Water supply turned on

−

0x04 – Vacuum cleaner

+

0x04 – Vacuum cleaner

−

0x08 – Unloading from the hopper

+

0x08 – Unloading from the hopper

−

0x10 – High Pressure washer (Karcher)

+

0x10 – High Pressure washer (Karcher)

−

0x20 – Salt (sand) disperser ON

+

0x20 – Salt (sand) disperser ON

−

0x40 – Low salt (sand) level

+

0x40 – Low salt (sand) level

−

Byte6:

+

Byte6:

−

0x01 – Second front hydraulic turned on

+

0x01 – Second front hydraulic turned on

−

0x02 – Third front hydraulic turned on

+

0x02 – Third front hydraulic turned on

−

0x04 – Fourth front hydraulic turned on

+

0x04 – Fourth front hydraulic turned on

−

0x08 – Second rear hydraulic turned on

+

0x08 – Second rear hydraulic turned on

−

0x10 – Third rear hydraulic turned on

+

0x10 – Third rear hydraulic turned on

−

0x20 – Fourth rear hydraulic turned on

+

0x20 – Fourth rear hydraulic turned on

−

0x40 – Front three-point Hitch turned on

+

0x40 – Front three-point Hitch turned on

−

0x80 – Rear three-point Hitch turned on

+

0x80 – Rear three-point Hitch turned on

−

Byte7: 0x01 – Left joystick moved right

+

Byte7: 0x01 – Left joystick moved right

−

0x02 – Left joystick moved left

+

0x02 – Left joystick moved left

−

0x04 – Left joystick moved front

+

0x04 – Left joystick moved front

−

0x08 – Left joystick moved back

+

0x08 – Left joystick moved back

−

0x10 – Front Power Take-Off turned on

+

0x10 – Front Power Take-Off turned on

−

0x20 – Liquid pump turned on

+

0x20 – Liquid pump turned on

−

0x40 – Light signal turned on

+

0x40 – Light signal turned on

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"| Security state flags

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Security state flags

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"| 8

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |8

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"| Byte0 (LSB):

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Byte0 (LSB):

−

0x01 – CAN1 connected, but currently module not received data

+

0x01 – CAN1 connected, but currently module not received data

−

0x02 – CAN1 not connected, require connection

+

0x02 – CAN1 not connected, require connection

−

0x03 – CAN1 connected

+

0x03 – CAN1 connected

−

0x04 – CAN2 connected, but currently module not received data

+

0x04 – CAN2 connected, but currently module not received data

−

0x08 – CAN2 not connected, require connection

+

0x08 – CAN2 not connected, require connection

−

0x0C – CAN2 connected

+

0x0C – CAN2 connected

−

0x10 – CAN3 connected, but currently module not received data

+

0x10 – CAN3 connected, but currently module not received data

−

0x20 – CAN3 not connected, require connection

+

0x20 – CAN3 not connected, require connection

−

0x30 – CAN3 connected

+

0x30 – CAN3 connected

−

Byte2:

+

Byte2:

−

0x04 – Battery charging

+

0x04 – Battery charging

−

0x08 – Charging cable connected

+

0x08 – Charging cable connected

−

0x10 – Vehicle working mode, 1- business mode, 0 - private mode

+

0x10 – Vehicle working mode, 1- business mode, 0 - private mode

−

0x20 – Bit appears when any operate button in car was put. This bit is reset if the button is released

+

0x20 – Bit appears when any operate button in car was put. This bit is reset if the button is released

−

0x40 – Bit appears when immobilizer is in service mode

+

0x40 – Bit appears when immobilizer is in service mode

−

0x80 – Immobiliser, bit appears during introduction of a programmed sequence of keys in the car

+

0x80 – Immobiliser, bit appears during introduction of a programmed sequence of keys in the car

−

Byte3:

+

Byte3:

−

0x01 – The key is in ignition lock

+

0x01 – The key is in ignition lock

−

0x02 – Ignition on

+

0x02 – Ignition on

−

0x04 – Dynamic ignition on

+

0x04 – Dynamic ignition on

−

0x08 – Webasto

+

0x08 – Webasto

−

0x10 – Car closed

+

0x10 – Car closed

−

0x20 – Car closed by factory's remote control

+

0x20 – Car closed by factory's remote control

−

0x40 – Factory-installed alarm system is actuated (is in panic mode)

+

0x40 – Factory-installed alarm system is actuated (is in panic mode)

−

0x80 – Factory-installed alarm system is emulated by module

+

0x80 – Factory-installed alarm system is emulated by module

−

Byte4:

+

Byte4:

−

0x01 – Parking activated (automatic gearbox)

+

0x01 – Parking activated (automatic gearbox)

−

0x10 – Handbrake is actuated (information available only with ignition on)

+

0x10 – Handbrake is actuated (information available only with ignition on)

−

0x20 – Footbrake is actuated (information available only with ignition on)

+

0x20 – Footbrake is actuated (information available only with ignition on)

−

0x40 – Engine is working (information available only when the ignition on)

+

0x40 – Engine is working (information available only when the ignition on)

−

0x80 – Reverse is on

+

0x80 – Reverse is on

−

Byte5:

+

Byte5:

−

0x01 – Front left door opened

+

0x01 – Front left door opened

−

0x02 – Front right door opened

+

0x02 – Front right door opened

−

0x04 – Rear left door opened

+

0x04 – Rear left door opened

−

0x08 – Rear right door opened

+

0x08 – Rear right door opened

−

0x10 – Engine cover opened

+

0x10 – Engine cover opened

−

0x20 – Trunk door opened

+

0x20 – Trunk door opened

−

Byte6:

+

Byte6:

−

– Low nibble (mask 0x0F value)

+

– Low nibble (mask 0x0F value)

−

0x01 – Car was closed by the factory's remote control

+

0x01 – Car was closed by the factory's remote control

−

0x02 – Car was opened by the factory's remote control

+

0x02 – Car was opened by the factory's remote control

−

0x03 – Trunk cover was opened by the factory's remote control

+

0x03 – Trunk cover was opened by the factory's remote control

−

0x04 – Module has sent a rearming signal

+

0x04 – Module has sent a rearming signal

−

0x05 – Car was closed three times by the factory's remote control

+

0x05 – Car was closed three times by the factory's remote control

−

– High nibble (mask 0xF0 bit)

+

– High nibble (mask 0xF0 bit)

−

0x80 – CAN module goes to sleep mode

+

0x80 – CAN module goes to sleep mode

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Tachograph driver card presence

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Tachograph driver card presence

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"| 1

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |1

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"| 0x00 – No driver card

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |0x00 – No driver card

−

0x01 – Driver1 card presence

+

0x01 – Driver1 card presence

−

0x02 – Driver2 card presence

+

0x02 – Driver2 card presence

−

0x03 – Driver1 and driver2 cards present

+

0x03 – Driver1 and driver2 cards present

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver 1 states

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver 1 states

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 1

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |1

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" ~~rowspan=2~~ | 0xX0 – Break/rest

+

| rowspan="2" style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |0xX0 – Break/rest

−

0xX1 – Availability

+

0xX1 – Availability

−

0xX2 – Work

+

0xX2 – Work

−

0xX3 – Driving

+

0xX3 – Driving

−

0x0X – No time-related warning detected

+

0x0X – No time-related warning detected

−

0x1X – Limit #1: 15 min before 4 1/2 h

+

0x1X – Limit #1: 15 min before 4 1/2 h

−

0x2X – Limit #2: 4 1/2 h reached (continuous driving time exceeded)

+

0x2X – Limit #2: 4 1/2 h reached (continuous driving time exceeded)

−

0x3X – Limit #3: 15 minutes before optional warning 1

+

0x3X – Limit #3: 15 minutes before optional warning 1

−

0x4X – Limit #4: optional warning 1 reached

+

0x4X – Limit #4: optional warning 1 reached

−

0x5X – Limit #5: 15 min before optional warning

+

0x5X – Limit #5: 15 min before optional warning

−

0x6X – Limit #6: optional warning 2 reached

+

0x6X – Limit #6: optional warning 2 reached

|-

−

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver 2 states

+

! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Driver 2 states

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 1

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |1

|}

−

+

==LV-CAN200/ALL-CAN300 Important Information==

===Program Number logic change===

−

Due to the growing number of supported cars, program numbers have exceeded "999". In order to maintain one number format, we are moving from 3-digit to 4-digit program numbers. In new LV-CAN200/ALL-CAN300 firmware (from 2017-09-01) all program numbers that were up to 999 are changed to start from 1000. So that further program numbers would continue the counting with 4-digit numbers. However, all existing program numbers stay the same, but "1" is added to the front. Device still understands the entered 3-digit program number (via SMS/GPRS), it will automatically add "1" before it. If you enter "247" - device number will turn into "1247". In Bootloader only 4-digit format is available, just add "1" to the front of the needed program number.

+

Due to the growing number of supported cars, program numbers have exceeded "999". In order to maintain one number format, we are moving from 3-digit to 4-digit program numbers. In new LV-CAN200/ALL-CAN300 firmware (from 2017-09-01) all program numbers that were up to 999 are changed to start from 1000. So that further program numbers would continue the counting with 4-digit numbers. However, all existing program numbers stay the same, but "1" is added to the front. Device still understands the entered 3-digit program number (via SMS/GPRS), it will automatically add "1" before it. If you enter "247" - device number will turn into "1247". In Bootloader only 4-digit format is available, just add "1" to the front of the needed program number.

===Example===

Line 631: Line 651:

Using LV-CAN200/ALL-CAN300 Bootloader from soft version 2017-09-27 it is necessary to add "1" to the front of program number:

[[Image:Fmb120_can_updater.png|400px|none]]

−

Vytenis.kibildis

Administrators

1,661

edits

Namespaces

Variants

Views

More

Search

Changes

Template:FMB CAN adapters (view source)

Revision as of 13:18, 27 July 2020

Navigation menu

Personal tools

NAVIGATION

Tools

Categories