Teltonika Vehicle Telematics device mounting instructions: Difference between revisions

Teltonika Vehicle Telematics device mounting instructions (view source)

49 bytes removed , 25 August 2020

0

edits

@@ Line 4: / Line 4: @@
 The tools and items needed to install a device are:
-* Pliers
+*Pliers
-* Multimeter
+*Multimeter
-* Tool Set
+*Tool Set
-* Fasteners (e.g. zip-ties)
+*Fasteners (e.g. zip-ties)
-* Quick wire splicing clips
+*Quick wire splicing clips
-* SIM card
+*SIM card
-===Open device casing to connect internal battery and insert SIM card. [https://youtu.be/XfWtFsYvUms?t=13 0:13]===
+===Open device casing to connect internal battery and insert SIM card.===
 Teltonika devices come with the internal backup battery disconnected (unless specially ordered), so before installation you must open the device and connect the battery. While the device casing is open, insert the SIM card you will use with your device.
-Step-by-step instructions on how to open your device can be found in your device's wiki page, in the First Start section.<br/>
+Step-by-step instructions on how to open your device can be found in your device's wiki page, in the First Start section.<br />
-*https://wiki.teltonika-gps.com/view/FMB920_First_Start#How_to_insert_Micro-SIM_card<br/>
-*https://wiki.teltonika-gps.com/view/FMB120_First_Start#How_to_insert_Micro-SIM_card<br/>
+*https://wiki.teltonika-gps.com/view/FMB920_First_Start#How_to_insert_Micro-SIM_card<br />
+*https://wiki.teltonika-gps.com/view/FMB120_First_Start#How_to_insert_Micro-SIM_card<br />
 *https://wiki.teltonika-gps.com/view/FMB640_First_Start#How_to_insert_Micro-SIM_card