Changes

{{{pic_autogeofence|[[Image:Fmb640_autogeofence.png|200 px|right]]}}}

{{{pic_autogeofence|[[Image:Fmb640_autogeofence.png|200 px|right]]}}}

AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurable. There is a possibility to state whether entering in or out of the geofence triggers an asynchronous message.

''AutoGeofence'' is based on the last known position after the movement has stopped. You can be notified using this function if your car is taken away. The shape and size of the Geofence zones are set by parameters. It is possible to state whether entering or leaving the geofence triggers an asynchronous message. The Auto Geofencing option can be configured by the following parameters:

Auto Geofencing option can be configured by following parameters:

* <span style=color:#F6A83E>Priority</span> – Priority of generated event, which will be applied to the saved record.

*Priority – Priority of generated event, which will be applied to saved record.

* <span style=color:#F6A83E>Eventual Records</span> – Scenario status will be (or not, if disabled) sent with each AVL record.

*Eventual Records - Scenario status will be (or not, if disabled) sent with each AVL

record.

Generate Event:

Generate Event:

*On Entrace – Event generation on Geofence entrance.

* <span style=color:#F6A83E>On Entrance</span> – Event generation on Geofence entrance.

*On Exit – Event generation on Geofence exit.

* <span style=color:#F6A83E>On Exit</span> – Event generation on Geofence exit.

*On Both - Event generation on Geofence entrance or exit.

* <span style=color:#F6A83E>On Both</span> – Event generation on Geofence entrance or exit.

*Activation Timeout – Time period before Geofence is activated after vehicle stops.

* <span style=color:#F6A83E>Activation Timeout</span> – Time period before Geofence is activated after vehicle stops.

*Radius - Radius of circle where in center of it is last coordinates of device when vehicle  

* <span style=color:#F6A83E>Radius</span> – Radius of circle where in center of it is last coordinates of device when the vehicle engine was running.

engine was running.

Deactivate By:

Deactivate By:

*Ignition – if ignition becomes high it will drop AutoGeofenze Zone

* <span style=color:#F6A83E>Ignition</span> – if ignition becomes high it will drop AutoGeofenze Zone

*iButton – if iButton is attached it will drop AutoGeofence Zone

* <span style=color:#F6A83E>iButton</span> – if iButton is attached it will drop AutoGeofence Zone

*Engine RPM - if engine RPM becomes more than zero it will drop AutoGeofence zone

* <span style=color:#F6A83E>Engine RPM</span> – if engine RPM becomes more than zero it will drop AutoGeofence zone