Changes

928 bytes added ,  15:25, 22 September 2020
no edit summary
Line 1: Line 1: −
{{emark description}}
+
[[File:E25 logo.png|thumb|right|upright=0.35|200px]]
 +
 
 +
E-Mark is the regulations issued by the Economic Commission for Europe (referred to as ECE).
 +
 
 +
==Description==
 +
 
 +
According to the UN European Economic Commission regulations and the provisions of EU directives, in order to enter the European market, cars, motorcycles and a variety of components and systems must be certified to meet the basic requirements of traffic safety and environmental protection. E-Mark and e-Mark are the European conformity marks issued by the transport sector, indicating that the products comply with relevant laws and regulations or directives. Vehicles and related products need to go through the E-Mark certification process to be legally sold in Europe.
 +
 
 +
There are currently 28 EU countries in ECE, in addition to EU member countries, including Eastern European, Southern European, and other non-European countries. ECE regulations apply to all members is recommended, not mandatory standards. Member States may apply the ECE regulations, or continue to use their own regulations. E-Mark logo is a circular frame, which means when the vehicle stop travel, the products must be used, for example, windshield, seat belts, headlights, and so on. Each EU member state has its own number of E-Mark certificate.
    
==Standards applied==
 
==Standards applied==
   −
This Approval shall apply to a type of electrical/electronic sub assemblies (ESA) from serial production under the following conditions:
+
This Approval shall apply to a type of electrical/electronic sub-assemblies (ESA) from serial production under the following conditions:
    
Individual products from serial production shall comply at least with all requirements set out in the '''Regulation No. 10 R, Amendment 05, Supplement 01''' "Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility".
 
Individual products from serial production shall comply at least with all requirements set out in the '''Regulation No. 10 R, Amendment 05, Supplement 01''' "Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility".
   −
Approval no.: '''E26 10 R 05 1282'''
+
Approval no.: '''E25 10 R 05 0026'''
   −
Extension No.: '''00'''
+
Extension No.: '''-'''
    
The attached test report and drawings shall be a constituent part of this Approval.
 
The attached test report and drawings shall be a constituent part of this Approval.
Line 24: Line 32:     
{|style="margin: 0 auto;valign="left""
 
{|style="margin: 0 auto;valign="left""
| [[File:E26_10_R_05_1282_00-1.png|thumb|left|250px|x250px|FMM640 E-mark page 1]]
+
| [[File:E25_R10-05_0025_1.png|thumb|left|250px|x250px|FMM640 E-mark page 1]]
| [[File:E26_10_R_05_1282_00-2.png|thumb|left|250px|x250px|FMM640 E-mark page 2]]
+
| [[File:E25_R10-05_0025_2.png|thumb|left|250px|x250px|FMM640 E-mark page 2]]
| [[File:E26_10_R_05_1282_00-3.png|thumb|left|250px|x250px|FMM640 E-mark page 3]]
+
| [[File:E25_R10-05_0025_2.png|thumb|left|250px|x250px|FMM640 E-mark page 3]]
| [[File:E26_10_R_05_1282_00-4.png|thumb|left|250px|x250px|FMM640 E-mark page 4]]
  −
| [[File:E26_10_R_05_1282_00-5.png|thumb|left|250px|x250px|FMM640 E-mark page 5]]
  −
| [[File:E26_10_R_05_1282_00-6.png|thumb|left|250px|x250px|FMM640 E-mark page 6]]
  −
| [[File:E26_10_R_05_1282_00-7.png|thumb|left|250px|x250px|FMM640 E-mark page 7]]
   
|}
 
|}
   −
You can find the PDF version of the certificate '''[[Media:E26_10_R_05_1282_00.pdf|here]]'''.
+
You can find the PDF version of the certificate '''[[Media:R10-05_0026(FMM640).pdf|here]]'''.
    
{{certification disclaimer}}
 
{{certification disclaimer}}
    
{{emark links}}
 
{{emark links}}

Navigation menu