Changes

*FMB1YX device, which is connected to the CAN adapter (or [[FMB140]] which has an internal CAN adapter), must be registered in Fota Web – device‘s model, firmware version, serial number, and other information must be shown.

*FMB1YX device, which is connected to the CAN adapter (or [[FMB140]] which has an internal CAN adapter), must be registered in Fota Web – device‘s model, firmware version, serial number, and other information must be shown.

*FMB1YX device, which is connected to the CAN adapter, must have a correct firmware version uploaded. Currently, this feature is supported from firmware 03.25.15.Rev.143 (FMB140 Firmware version), however it is suggested to use Firmware version which is 03.25.16.Rev.281 [[FMB140_firmware_errata|FMB140]]. If you want to update your CAN Adapter, please contact your local Teltonika sales manager or Teltonika GPS technical support. Once a device with the correct firmware version connects to Fota Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), a small, blue, „CAN“ logo will appear next to the device‘s model:

*FMB1YX device, which is connected to the CAN adapter, must have a correct firmware version uploaded. Currently, this feature is supported from firmware 03.25.15.Rev.143 (FMB140 Firmware version), however it is suggested to use Firmware version which is 03.25.16.Rev.410 [[FMB140_firmware_errata|FMB140]]. If you want to update your CAN Adapter, please contact your local Teltonika sales manager or Teltonika GPS technical support. Once a device with the correct firmware version connects to Fota Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), a small, blue, „CAN“ logo will appear next to the device‘s model:

[[Image:11I registered.jpg|1160x1160px|center]]

[[Image:11I registered.jpg|1160x1160px|center]]