Changes
no edit summary
*
*
* Teltonika FM device which is compatible with this use case. Recommended products: FMB001, FMC001, FMM001, FM3001, FMU126, FMB002, FMB010, FMB003 or FMB020.
* Teltonika FM device which is compatible with this use case. Recommended products are: FMB001, FMC001, FMM001, FM3001, FMU126, FMB002, FMB010, FMB003 or FMB020.
* The SIM card in order to receive data to Your server.
* The SIM card in order to receive data to Your server.
* [[Teltonika Configurator]] to set up FM device correctly for the solution.
* [[Teltonika Configurator]] to set up FM device correctly for the solution.
== Installation ==
== Installation ==
Most of recommended products are "Plug and Play" devices. It means that devices are directly plugged into vehicles OBDII socket and after configuration is complete - devices are set. Although, if plugged OBDII device is too hard to reach and vehicle parts are interfering with GPS signal or vehicle parts need to be removed/opened to access OBDII socket and afterwards parts no longer fit or close - Teltonika offers OBDII extension cable. [https://teltonika-gps.com/product/obdii-cable/]
Most of recommended products are "Plug and Play" devices. It means that devices are directly plugged into vehicles OBDII socket and after configuration is complete - devices are set for use. Although, if plugged OBDII device is too hard to reach and vehicle parts are interfering with GPS signal or vehicle parts need to be removed/opened to access OBDII socket and afterwards parts no longer fit or close - Teltonika offers OBDII extension cable. [https://teltonika-gps.com/product/obdii-cable/]
Keep in mind, that FMU126 device is not "Plug and Play" type and requires more advanced installation. [https://wiki.teltonika-gps.com/view/FMU126_First_Start] Also, particular FM device is specially built for Thailand region.
Keep in mind, that FMU126 device is not "Plug and Play" type and requires more advanced installation. [https://wiki.teltonika-gps.com/view/FMU126_First_Start] Also, particular FM device is specially built for Thailand region.
=== Configuring GPS electronic logbook ===
=== Configuring GPS electronic logbook ===
After familiarizing with devices first start guide and device's GPRS settings are set - configuration for GPS electronic logbook can be done.
After familiarizing with devices first start guide and device's GPRS settings are set - configuration for GPS electronic logbook can be done. Configuration:
[[File:Trip settings.png|left|thumb|439x439px]]
[[File:Trip settings.png|left|thumb|439x439px]]
''Parameter ID'' - ''Parameter name''
''Parameter ID'' - ''Parameter name''
Packet information can be displayed visually. In the picture below, event location is displayed on the map. Dot on the map represents a record. By clicking on it, it is possible to see what kind of information is gathered in the particular entry.
Packet information can be displayed visually. In the picture below, event location is displayed on the map. Dot on the map represents a record. By clicking on it, it is possible to see what kind of information is gathered in the particular entry.
[[File:Viz.png|center|thumb|1024x1024px]]
[[File:Viz.png|center|thumb|1024x1024px]]
In order to visually see received information:
In order to visually see received information on the platforms:
* '''TAVL''': Open TAVL → select client → select Street Map → select device → choose the date from which to which to show the records → push advanced → push show button and then you will see in left down corner all information.
* '''TAVL''': Open TAVL → select client → select Street Map → select device → choose the date from which to which to show the records → push advanced → push show button and then you will see in left down corner all information.
* '''WIALON''': Open WIALON → open messages → push unit ( select your device) → choose the date from which to which to show the records → select message (data messages) → push execute button and you will see all information.
* '''WIALON''': Open WIALON → open messages → push unit ( select your device) → choose the date from which to which to show the records → select message (data messages) → push execute button and you will see all information.
