Changes

{{{model|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model|FMB1YX}}} is connected to.

{{{model|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model|FMB1YX}}} is connected to.

{{{pic_operators|[[Image:FMB120 GSM operators.png|800px|none]]}}}

{{{pic_operators|[[Image:FMB120 GSM operators gif.gif|800px|none]]}}}

If the roaming operator list is left empty, {{{model|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

If the roaming operator list is left empty, {{{model|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

{{{dual_sim|}}}

{{{dual_sim|}}}