0
edits
Changes
Template:FMM Features settings (view source)
Revision as of 18:22, 4 March 2021
, 18:22, 4 March 2021no edit summary
==Over Speeding==
==Over Speeding==
[[Image:FMB120_Over_Speeding.png|300px|size|right]]
[[Image:Over_Speeding.gif|{{{general|size}}}|right]]
When vehicle speed exceeds configured maximum speed value the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br/>Scenario is active until detected speed decreases below the set parameter value.<br/>{{{over_speeding_dout|info}}}
When vehicle speed exceeds configured maximum speed value the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br/>Scenario is active until detected speed decreases below the set parameter value.<br/>{{{over_speeding_dout|info}}}
{{{dout_control_via_call_feature|== DOUT Control Via Call==
{{{dout_control_via_call_feature|== DOUT Control Via Call==
[[Image:FMB120_DOUT_Control_Via_Call.png|295px|size|right]]
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]
Scenario is activated and digital output is ON when call is received from a number which is on the authorized numbers list.<br/>
Scenario is activated and digital output is ON when call is received from a number which is on the authorized numbers list.<br/>
{{{immobilizer_feature|==Immobilizer==
{{{immobilizer_feature|==Immobilizer==
[[Image:FMB120_Immobilizer.png|300px|size|right]]
[[Image:Immobilizer.gif|{{{general|size}}}|right]]
If ''DOUT Control'' is disabled, scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise immobilizer must be repeated. If ''iButton List Check'' parameter is enabled, authorization will be successful only if the attached iButton is specified in iButton list.<br/>{{{immobilizer_dout|info}}}
If ''DOUT Control'' is disabled, scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise immobilizer must be repeated. If ''iButton List Check'' parameter is enabled, authorization will be successful only if the attached iButton is specified in iButton list.<br/>{{{immobilizer_dout|info}}}
