505
edits
Changes
Universal Device Test Guide (view source)
Revision as of 15:56, 26 March 2021
, 15:56, 26 March 2021→How to insert SIM card and connect the battery*
=='''How to insert SIM card and connect the battery*'''==
=='''How to insert SIM card and connect the battery*'''==
All our devices use SIM card for GSM/GPRS communication, thus you will not be able to get any data and/or communicate with the device remotely without the SIM card. In this chapter you will find a guide on how to insert SIM card into your device.
# Gently remove '''device cover''' using '''plastic pry tool''' from both sides as it is showed in a 1st picture.
# Gently remove '''device cover''' using '''plastic pry tool''' from both sides as it is showed in a 1st picture.
# Insert '''SIM''' card as shown with '''PIN request disabled''' or read [[FMB9YX Security info|'''Security info''']] how to enter it later in Configurator. Make sure that SIM card '''cut-off corner''' is pointing forward to slot.
# Insert '''SIM''' card as shown with '''PIN request disabled''' or read '''[[FMB120 Security info|Security info]]''' (Universal Guide) how to enter it later in Configurator. Make sure that SIM card '''cut-off corner''' is pointing forward to slot.
# Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
# Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
# Attach device '''cover''' back. Device is ready to be connected.
# Attach device '''cover''' back. Device is ready to be connected.
