333
edits
Changes
Added Battery placement chapter
|sim_insert_pic4=FMB110-Battery-4.png
|sim_insert_pic4=FMB110-Battery-4.png
}}
}}
== '''Battery placement after complete device disassemble''' ==
[[File:Battery placement.png|left]]
[[File:Pcb placement.png|right|frameless]]
# Using double sided tape, stick internal battery to the bottom part of the device case. Battery should be glued approximately 15 millimeters from the bottom wall of the case. ''Picture on the left''.
# Connect battery to the PCB.
# Place PCB into the bottom case by firstly inserting PCB part where antenna is located. Afterwards, press down PCB part where pins are located.
'''Note:''' be gently, not to damage or bend antenna.
=='''2x6 socket pinout'''==
=='''2x6 socket pinout'''==
