Changes

no edit summary
Line 10: Line 10:  
* The secure vehicle disabling solution is supported by '''any Teltonika FMB series tracker which has''' one or more '''digital output''' (DOUT) which in this scenario is used to control fuel pump of the car.
 
* The secure vehicle disabling solution is supported by '''any Teltonika FMB series tracker which has''' one or more '''digital output''' (DOUT) which in this scenario is used to control fuel pump of the car.
 
* The SIM card in order to get data to your server.
 
* The SIM card in order to get data to your server.
* The secure engine cut-off (SECO) functionality is only available in Teltonika FMB series GPS trackers starting with the firmware version 03.25.10.Rev.111 or higher.
+
* The secure engine cut-off (SECO) functionality is only available in Teltonika FMB series GPS trackers starting with the firmware version 03.25.10.Rev.111.
 
* FOTA WEB to remotely send the configuration to the device.
 
* FOTA WEB to remotely send the configuration to the device.
    
==Installation==
 
==Installation==
It’s important to well hide tracker, so it would not be a simple task for the thieves to find and unplug it. But also, please do not forget to follow [https://wiki.teltonika-gps.com/view/FMB130_First_Start#Mounting_recommendations mounting recommendations] as well. Although devices have high gain antennas it’s important to mount devices with stickers on top and in metal-free space. The device should be firmly fixed to the surface or cables. Please make sure, that device is not fixed to heat emitting or moving parts.
+
The device should be installed according to the principal diagram. Connect a digital output to the relay's pin 85, the power supply to the pins 86 and 87a, and the fuel pump power cable to the pin 30.[[File:Wiring scheme.png|alt=|right|frameless|357x357px]]
 +
'''Note:''' Any of the digital outputs can be used for this function.
    +
It’s important to well hide tracker, so it would not be a simple task for the thieves to find and unplug it. But also, please do not forget to follow [https://wiki.teltonika-gps.com/view/FMB130_First_Start#Mounting_recommendations mounting recommendations] as well.
 +
Although devices have high gain antennas it’s important to mount devices with stickers on top and in metal-free space. The device should be firmly fixed to the surface or cables. Please make sure, that device is not fixed to heat emitting or moving parts.
    
During installation please follow recommendations in order to avoid damaging device and vehicle:
 
During installation please follow recommendations in order to avoid damaging device and vehicle:
Anonymous user

Navigation menu