Changes

__TOC__

__TOC__

==Beacon List Settings before FW ver. 3.27.07.00==  

==Beacon List Settings before FW ver. 3.27.07.Rev.00==  

This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>

This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>

===Beacon Settings===

===Beacon Settings===

'''Beacon Detection'''<br>

'''Beacon Detection'''<br>

* '''''Disabled''''' – Functionality disabled.<br>

* '''''Disabled''''' – Functionality disabled.<br>

* '''''All''''' – All visible beacons are detected.<br>

* '''''All''''' – All visible beacons are detected. (Max. 100)<br>

* '''''Configured''''' – Only beacons from the list are sent to server<br>

* '''''Configured''''' – Only beacons from the list are sent to server<br>

* Record Period on Move & Record Period on Stop. Timers for record generation when the device is moving and staying at the place.

* Record Period on Move & Record Period on Stop. Timers for record generation when the device is moving and staying at the place.

* Record Period on Move (Default value 60 seconds)<br>

* Record Period on Move (Default value 60 seconds)<br>

* Record Period on Stop (Default value 60 seconds)<br>

* Record Period on Stop (Default value 60 seconds)<br><br>

[[Image:Beacon Settings.PNG|300px|none]]

[[File:Oldbeaconsets.gif|left]]<br><br><br><br><br><br><br><br><br><br>

While selecting the '''Beacons Detection''' as '''All''', the device will detect all beacons which are located around the device.

While selecting the '''Beacons Detection''' as '''All''', the device will detect all beacons which are located around the device.

Select '''Beacons Detection''' as the '''Configured''', in this case, the beacons will only be detected and send if they were added to the Beacons List.

Select '''Beacons Detection''' as the '''Configured''', in this case, the beacons will only be detected and send if they were added to the Beacons List.

===Beacon List===

===Beacon List===

There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List.

There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List.

==Beacon List Settings after FW ver. 3.27.07.00==  

==Beacon List Settings after FW ver. 3.27.07.Rev.00==  

This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>

This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>

===Beacon Settings===

===Beacon Settings===

'''Beacon Detection'''<br>

'''Beacon Detection'''<br>

* '''''Disabled''''' – Functionality disabled.<br>

* '''''Disabled''''' – Functionality disabled.<br>

* '''''All''''' – All visible beacons are detected (Max. 50).<br>

* '''''All''''' – All visible beacons are detected (Max. 100).<br>

* '''''Configured''''' – Only beacons from the list are sent to server<br>

* '''''Configured''''' – Only beacons from the list are sent to server<br>

'''Beacon Mode'''<br>

'''Beacon Mode'''<br>

* '''''Simple''''' – When simple mode is selected beacon parsing is done automatically (Eddystone and iBeacon protocols are supported).<br>

* '''''Simple''''' – When simple mode is selected beacon parsing is done automatically (Eddystone and iBeacon protocols are supported) ('''AVL ID 385''').<br>

* '''''Advanced''''' – When advanced beacon mode is selected, beacon data capturing can be configured manually.<br>

* '''''Advanced''''' – When advanced beacon mode is selected, beacon data capturing can be configured manually ('''AVL ID 548''').<br>

'''Beacon Record'''<br>

'''Beacon Record'''<br>

===Advanced Beacon Mode===

===Advanced Beacon Mode===

[[File:BeaconMode.gif|right]]

[[File:BeaconMode.gif|right]]

In advanced mode device can detect any Universal Beacon type as configured in table, for example this configuration is set to detect iBeacon and EddyStone Beacons, also with additional data(in this case whole packet).

In advanced mode device can detect any Beacon type, the device can be configured to capture data from Universal beacons as seen in the configured in table (The fields in the Beacons Capturing Configuration will be empty), for example this configuration is set to detect iBeacon and EddyStone Beacons, also with additional data(in this case whole packet).

<br>

<br>

<br>

<br>

Or by the Major/Minor for iBeacons and Namespace for Eddystone. (see the 3 and 7 elements in the list).<br/>

Or by the Major/Minor for iBeacons and Namespace for Eddystone. (see the 3 and 7 elements in the list).<br/>

There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List.

There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List.