1,087
edits
Changes
no edit summary
{{{fmb_miniUSBpowerup|{{{model|FMB1YX}}} device can be connected to PC for configuration in two different ways:
{{{fmb_USBpwr_tray|{{{model|FMB1YX}}} device can be connected to PC for configuration in two different ways:
#'''DC with Bluetooth'''
## Power-up {{{model|FMB1YX}}} with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.
## {{{model|FMB1YX}}} Bluetooth is enabled by default. Turn on '''Bluetooth''' on your PC, then select '''Add Bluetooth or other device > Bluetooth'''. Choose your device named – “'''{{{model|FMB1YX}}}_last_7_imei_digits'''”, without '''LE''' in the end. Enter default password '''5555''', press '''Connect''' and then select '''Done'''.
#'''With Micro-USB cable'''
{{{SIMtray|## Remove SIM tray <br/>
## Remove TOP cover <br/>
## Insert the SIM card into SIM tray <br/>
## Insert SIM Tray into device <br/>|SIMtray=YES}}}
{{{SIMtray|## Remove SIM tray <br/>
## Remove TOP cover <br/>|SIMtray=NO}}}
## Connect {{{usb_cable|Micro-USB}}} cable to device and connect to computer USB port. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.
*First time you will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"
*GSM signal will not be available and device will not open GPRS because TOP casing part is removed and GSM antenna is inserted into TOP casing part.
}}}
{{{fmb_USBpwr|{{{model|FMB1YX}}} device can be connected to PC for configuration in two different ways:
#'''DC with Bluetooth'''
#'''DC with Bluetooth'''
## Power-up {{{model|FMB1YX}}} with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.
## Power-up {{{model|FMB1YX}}} with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.
