2,019 bytes added
, 12:50, 1 October 2021
== Description ==
Cable is a '''standardized''' heavy duty vehicle '''FMS 12-pin''' connector, for connecting FMX640 with '''one plug''' and receiving '''vehicle information''' through CAN line and K-line, along with '''powering the device''' and getting '''Ignition detection'''. This ensures easier connection and does not violate the '''factory warranty.'''
{| class="wikitable"
|+Technical data of the cable:
|Supported devices
|FMB640/FMC640/FMM640/FM6300
|-
|Number of pins
|12
|-
|Pinout
|Pin12: VDC
Pin1: GND
Pin6: CAN H
Pin9: CAN L
Pin10: Ignition
Pin7: K-line
|-
|Supported protocols
|FMS/K-Line
|-
|Length
|0.9 meter
|}
[[File:Fms-cable-scheme.jpg|center|frameless|852x852px]]
==FMS Plug Location==
Even though the FMS cable is standardized cable – its placement in the vehicle might differ depending on manufacturer and depending on vehicle trim level.
We were able to identify the most common places for the FMS plug – refer to the examples bellow:
==== Behind the Fuse panel on passenger side – for Example SCANIA S/R/G/P Euro6 Series [[File:Scania R-series 1.3.png|frameless|1000x1000px]] ====
==== Near the Fuse panel on passenger side – for example DAF XF Euro6 [[File:DAF XF 1.3.png|frameless|1000x1000px]] ====
==== Behind the Radio on lower deck – for example Volvo FH Euro5 and Renault T Euro6 [[File:Volvo FH 1.3.png|frameless|1000x1000px]] ====
==== Behind the Tachograph on upper deck – for example Mercedes Actros MP5 Euro6 [[File:Mercedes Actros 1.3.png|frameless|1000x1000px]] ====
==Remote Data Download (RDD) via FMS==
When RDD (Remote Data Download) signal available on '''FMS'''.
Applies to:
* DAF CF - LF - XF
* IVECO Stralis I / II/ Hi-Way
* Renault D / Magnum DXI & E-TECH / Midlum DXI / Premium DXI / Renault T-K-C
* Volvo FH - FM - FL
<br>
For the following vehicles regarding the '''RDD''', please contact the manufacturer:
* MAN TGX - TGA - TGL - TGM
* Mercedes Actros / Antos / Atego / Arocs / Axor II
* Scania R - P - G - S
[[Category:FMM640 Manual]]