0
edits
Changes
Advanced Beacon Capturing Configuration (view source)
Revision as of 13:38, 17 December 2021
, 13:38, 17 December 2021no edit summary
'''Beacon Detection'''
'''Beacon Detection'''
* '''''Disabled''''' – Beacon detection is disabled.
* '''''Disabled''''' – Beacon detection is disabled.
* '''''All''''' – Beacon list is disabled, device will not check by the Beacon list. None the less, device will keep looking by Advanced list too if enabled.
* '''''All''''' – All visible beacons are detected (Max. 100).
* '''''Configured''''' – device will only capture beacons by given data in Beacon list and Advanced list if enabled.
* '''''Configured''''' – device will only capture beacons by given data in Beacon list and Advanced list if enabled.
'''Beacon Record'''
'''Beacon Record'''
* '''''On Change''''' – On change mode - device will not create Beacon record after every scan procedure is completed unless scanned Beacon list will change.
* '''''On Change''''' – device will not create Beacon record after every scan procedure is completed unless scanned Beacon list will change.
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).
