Changes

Template:FMX2YX First start card withoutSD (view source)

Revision as of 16:44, 25 January 2022

87 bytes added ,  16:44, 25 January 2022
no edit summary
Line 10: Line 10:       −
=='''How to insert {{{sim_type|Micro-}}}SIM card'''==
+
=='''How to insert {{{sim_type|Micro-}}}SIM card and connect battery'''==
 +
 
 +
1.You will receive your device partly closed.<br>
 +
2.Gently remove top and bottom covers.<br>
 +
3.Insert SIM card as shown with PIN request disabled or read our Wiki how to enter it later in Teltonika Configurator. Make sure that SIM card cut-off corner is pointing outward from slot. SIM slot 1 is closer to PCB, SIM slot 2 is the top one. <br>
 +
4.Connect battery as shown to device. Position the battery in place where it does not obstruct other components. <br>
 +
5.After configuration, see “PC Connection (Windows)”, attach device top and bottom cover back and press them twice to the full closure. <br>
 +
6.Make sure that product casing is closed correctly. <br>
   −
#Gently remove {{{model|FMX2YX}}} '''cover''' using '''plastic pry tool''' from both sides.
  −
#Disassemble the device, remove both sides from the PCB
  −
#Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}
  −
#Connect the battery
  −
#Place the battery in the housing
  −
#Attach device '''cover''' back.
        Line 24: Line 25:  
{|
 
{|
 
|-
 
|-
−
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
+
| [[File:Alert.png|left|link=]] || This device has an IP67 casing with a two-phase closing, that ensures a reliable protection and ease of use. Please make sure that product casing corner clips are fixed tightly and cable is connected to the device in order to maintain the degree of IP67 protection.
 
|}
 
|}
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/70512"

Navigation menu