0
edits
Changes
no edit summary
[[File:Example Inst.jpg|thumb|Instalation|alt=|260x260px]]
[[File:Example Inst.jpg|thumb|Instalation|alt=|260x260px]]
For gain access to ability change default security state (for device from the factory) you need power up device (10-30V) and connect via USB to the PC. After device will be powered and LED indicators start work you can access to settings.
For gain access to ability change default security state (for device from the factory) you need power up device (10-30V) and connect via USB to the PC. After device will be powered and LED indicators start work you can access to settings.
====2.1. Set up Keyword:====
====2.1. Set up Keyword:====
[[File:Keyword use.gif|thumb|379x379px|alt=|Set up keyword]]
[[File:Sey up keyword.gif|alt=|frame|Set up keyword]]
Configuration security keyword can be set to configurator. Keyword can be saved in configuration file (.cfg), so there is no need to connect the device to the configurator to configure the keyword. Minimum keyword length is 4 symbols and maximum length is 10 symbols. Only uppercase and lowercase letters and numbers are supported. Keyword can be configured to .cfg configuration file when the device is not connected.
Configuration security keyword can be set to configurator. Keyword can be saved in configuration file (.cfg), so there is no need to connect the device to the configurator to configure the keyword. Minimum keyword length is 4 symbols and maximum length is 10 symbols. Only uppercase and lowercase letters and numbers are supported. Keyword can be configured to .cfg configuration file when the device is not connected.
It can be changed via USB and also via SMS.
It can be changed via USB and also via SMS.
This command will emove existing keyword. If device is locked, keyword cannot be changed.
This command will emove existing keyword. If device is locked, keyword cannot be changed.
====2.2. SMS security:====
====2.2. SMS security:====
[[File:SMS_Security.gif|alt=|Set up sms secutiry|thumb|365x365px]]
[[File:Set up SMS security.gif|alt=|thumb|365x365px|Set up sms secutiry]]
Essential fields in SMS/Call settings are Login and Password. The login and password are used with every SMS sent to FMB130. If login and password are not set, in every SMS sent to FMB125 device two spaces before command have to be used (<space><space><command>).
Essential fields in SMS/Call settings are Login and Password. The login and password are used with every SMS sent to FMB130. If login and password are not set, in every SMS sent to FMB125 device two spaces before command have to be used (<space><space><command>).
Phone numbers have to be written in international standard, using "+" is optional but not necessary (in both cases number will be recognized, but when number is without "+" symbol, IDD Prefix will not be generated, which depends on location of the phone). If no numbers are entered, configuration and sending commands over SMS are allowed from all GSM numbers.
Phone numbers have to be written in international standard, using "+" is optional but not necessary (in both cases number will be recognized, but when number is without "+" symbol, IDD Prefix will not be generated, which depends on location of the phone). If no numbers are entered, configuration and sending commands over SMS are allowed from all GSM numbers.
If a key is present the outgoing data will be ciphered by the configured key and incoming data will be deciphered. The '''AES128 key''' must be in '''HEX format with a length of 16 bytes'''. As an example 11223344556677889900AABBCCDDEEFF is used.
If a key is present the outgoing data will be ciphered by the configured key and incoming data will be deciphered. The '''AES128 key''' must be in '''HEX format with a length of 16 bytes'''. As an example 11223344556677889900AABBCCDDEEFF is used.
==SECURE CONNECTION TO SERVER (TLS)==
==SECURE CONNECTION TO SERVER (TLS)==
[[File:TLS.gif|alt=|thumb|365x365px]]
[[File:Tls option.gif|alt=|thumb|365x365px|Secure connection to server]]
In 03.27.07 base firmware version, Transport Layer Security TLS functionality has been updated and implemented for Teltonika GPS device series FMB0YX, FMB9X0, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FMB2YX, and the model FMT100.
In 03.27.07 base firmware version, Transport Layer Security TLS functionality has been updated and implemented for Teltonika GPS device series FMB0YX, FMB9X0, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FMB2YX, and the model FMT100.
TLS is a cryptographic protocol that provides end-to-end security of data sent between server and tracker.
TLS is a cryptographic protocol that provides end-to-end security of data sent between server and tracker.
