Changes

To enable internal battery voltage in the scan response frame, battery voltage presence must be configured in the NFC memory using ELA's Device Manager Mobile application.

To enable internal battery voltage in the scan response frame, battery voltage presence must be configured in the NFC memory using ELA's Device Manager Mobile application.

For more detailed information about Advanced Beacon Capturing Configuration please refer [[FMB920 Beacon List#Advanced Beacon Capturing Configuration|here]]. Make sure to use firmware no later that 3.27.07.Rev.00.

In order to capture ELA battery information, it is required to use ''Beacon Capturing Configuration'' table which is added from 03.27.07.Rev.00 firmware version or above. For more detailed information about ''Beacon Capturing Configuration'' please refer [[FMB920 Beacon List#Advanced Beacon Capturing Configuration|here]].

In Scan Response frame, bytes 6 and 7 are listed as LSB and MSB, meaning that byte 7 should be calculated first and byte 6 second. Example: AC0B ->0BAC; 0BAC(hex) -> 2988(dec)*0.001 multiplier. Gives 2.988V internal battery voltage.

In Scan Response frame, bytes 6 and 7 are listed as LSB and MSB, meaning that byte 7 should be calculated first and byte 6 second. Example: AC0B ->0BAC; 0BAC(hex) -> 2988(dec)*0.001 multiplier. Gives 2.988V internal battery voltage.

Note: only sensors that are v3.0 support this functionality.

Notes:  

 

* only sensors that are v3.0 support this functionality.

 

[[File:Scan response.png|right|frameless|[https://elainnovation.com/wp-content/uploads/2020/10/BLE-Frame-specifications-11B-EN.pdf]]]

[[File:Scan response.png|right|frameless|[https://elainnovation.com/wp-content/uploads/2020/10/BLE-Frame-specifications-11B-EN.pdf]]]

<br></br>

<br></br>

<br></br>

<br></br>