Changes

In order to capture ELA battery information, it is required to use ''Beacon Capturing Configuration'' table which is added from 03.27.07.Rev.00 firmware version or above. For more detailed information about ''Beacon Capturing Configuration'' please refer [[FMB920 Beacon List#Advanced Beacon Capturing Configuration|here]].

In order to capture ELA battery information, it is required to use ''Beacon Capturing Configuration'' table which is added from 03.27.07.Rev.00 firmware version or above. For more detailed information about ''Beacon Capturing Configuration'' please refer [[FMB920 Beacon List#Advanced Beacon Capturing Configuration|here]].

Broadcasting information can be classified into two main sections: Advertisement and scan response. In Scan Response frame, bytes 6 and 7 are listed as LSB and MSB, meaning that byte 7 should be calculated first and byte 6 second. Example: AC0B ->0BAC; 0BAC(hex) -> 2988(dec)*0.001 multiplier. Gives 2.988V internal battery voltage.

Broadcasting information can be classified into two main sections: Advertisement and scan response. In Scan Response frame, bytes 6 and 7 are listed as LSB and MSB, meaning that byte 7 should be calculated first and byte 6 second. Example: AC0B ->0BAC; 0BAC(hex) -> 2988(dec)*0.001 multiplier. Gives 2.988V internal battery voltage.  

Notes:  

[[File:Scan response.png|frameless|[https://elainnovation.com/wp-content/uploads/2020/10/BLE-Frame-specifications-11B-EN.pdf]|alt=|left|370x370px]]

== Examples of ELA sensor whole packet capturing ==

== Examples of ELA sensor whole packet capturing ==

{| class="wikitable"

{| class="wikitable"