Changes

7 Put the cards back in, power the camera on. Do not reconnect the camera to the FMx125 or configure RS232 mode back yet.     

7 Put the cards back in, power the camera on. Do not reconnect the camera to the FMx125 or configure RS232 mode back yet.     

8 Wait 60-90s. You should hear a click from the rear camera after the update succeeds. That click sound indicates restart of the rear camera which happens after successful firmware update.     

8 '''Wait 60-90s for 2.2.0 version (for 2.2.2 version wait 120s).'''  You should hear a click from the rear camera after the update succeeds. That click sound indicates restart of the rear camera which happens after successful firmware update.     

9 Even if you don't hear the clicking sound, reconnect the camera to the FMx125 (or reconfigure RS232 mode back to DualCam) after few minutes anyway and send SMS “camgetver” command to check the versions.     

9 Even if you don't hear the clicking sound, reconnect the camera to the FMx125 (or reconfigure RS232 mode back to DualCam) after few minutes anyway and send SMS “camgetver” command to check the versions.     

12 Take the cards out and write the firmware file of V2.2.2 to the root of both SD cards. The file name is “ALL222_IPC_BIN”. Again, do not rename it.   

12 Take the cards out and write the firmware file of V2.2.2 to the root of both SD cards. The file name is “ALL222_IPC_BIN”. Again, do not rename it.   

13 Repeat steps 6, 7, and 8. After that go with step 13.  

13 Repeat steps 6, 7, and 8. After that go with step 13.  

14 Now, if all went successfully, return to the '''“camgetver”''' should return this:   

14 Now, if all went successfully, return to the '''“camgetver”''' should return this: