682
edits
Changes
→Configuring FM device
#In [[FMB120_Bluetooth_4.0_settings|Bluetooth 4.0]] settings, set Non Stop Scan to "enabled" or "disabled" and configure the desired update interval.
#In [[FMB120_Bluetooth_4.0_settings|Bluetooth 4.0]] settings, set Non Stop Scan to "enabled" or "disabled" and configure the desired update interval.
#In [[FMB120_Beacon_List|Beacon list]] settings, configure Beacon Detection as "Configured" and Beacon Record as "Periodic". This configuration will allow detection of beacons from the beacon list and send periodical positioning data to the server. However, keep in mind only 50 beacons can be added to the beacon list.
#In [[FMB120_Beacon_List|Beacon list]] settings, configure Beacon Detection as "Configured" and Beacon Record as "Periodic". This configuration will allow detection of beacons from the beacon list and send periodical positioning data to the server. However, keep in mind only 50 beacons can be added to the beacon list.
•If the beacon detection option is set to Configured, only beacons from the beacon list will be detected and their data will be sent to the server.
<br>
<br>
•If beacon detection is set to All, all beacons will be detected by the FM device, therefore beacon lists will not have to be configured on the devices. <br>
•It is also possible to configure the device to recognize the beacon by it’s MAC address.<br>
As always, FM device configuration will vary depending on the User’s exact needs.
As always, FM device configuration will vary depending on the User’s exact needs.
==Configuring EyeBeacon==
==Configuring EyeBeacon==
Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
