Changes

[[Image:Fmb120_trip_settings.png|300px|right]]

[[Image:Fmb120_trip_settings.png|300px|right]]

Trip window offers user to configure Trip feature. If Trip is enabled configuration of parameters are enabled.<br/>Start Speed (km/h) – GPS speed has to be greater than the specified Start Speed in order to detect Trip Start.<br/>Ignition OFF Timeout (s) – timeout to wait if ignition (configured ignition source) was off, to detect Trip stop.<br/>Distance counting mode – Between Records or Continuous can be chosen. For this feature I/O Trip Odometer must be enabled.<br/>If I/O Trip Odometer is enabled and Continuous distance counting variable (Mode) is set to Continuous, Trip distance is going to be counted continuously (from Trip start to Trip stop). This value is written to I/O Trip Odometer value field. When Trip is over and next Trip begins, Trip Odometer value is reset to zero. When the next trip starts counting continuously starts from the beginning again.<br/>If I/O Trip Odometer is enabled and Continuous Distance Counting variable (Mode) is set “Between Records”, then the distance is going to be counted only between every record made. This value is written to I/O Trip Odometer value field and reset to zero every new record until Trip stops. If later all Odometer values are summed up manually, the user gets the distance driven during the whole period of the Trip.<br/>

Trip window offers user to configure the Trip feature. If Trip is enabled, configuration of Trip parameters is enabled.<br/>''Start Speed'' (km/h) defines the minimum GPS speed in order to detect Trip Start.<br/>''Ignition OFF Timeout'' is the timeout value to detect Trip Stop once the Ignition (configured ignition source) is off.<br/>To use feature ''Distance counting mode'' I/O Trip Odometer must be enabled. When it is set to <span style=color:#F6A83E>Continuous</span>, Trip distance is going to be counted continuously (from Trip start to Trip stop) and is written to I/O ''Trip Odometer'' value field. When Trip is over and next Trip begins, ''Trip Odometer'' value is reset to zero.<br/>When ''Mode'' is set <span style=color:#F6A83E>Between Records</span>, the distance is going to be counted only between every record made. This value is written to I/O ''Trip Odometer'' value field and is reset to zero every new record until the Trip stops. If later all Odometer values are summed up manually, the user gets the distance driven during the whole period of the Trip.<br/>

[[Image:Fmb120_trip_mode.png|600px|center]]

[[Image:Fmb120_trip_mode.png|600px|center]]