0
edits
Changes
mLine 295:
Line 295: − + − + − +
→LV -CAN200/ALLAN300 Important Information
==LV -CAN200/ALLAN300 Important Information==
==LV -CAN200/ALLAN300 Important Information==
===Program Number logic change===
===Program Number logic change===
Due to the growing number of supported cars, program numbers have exceeded 999. In order to maintain one number format, we are moving from 3 digits, to 4 digits program numbers.<br/>In new LV-CAN200/ALL-CAN300 firmware (from 2017-09-01) all program numbers that were up to 999 are changed to start from 1000. So that further program numbers would continue the counting with 4 digit numbers.<br/>However, all existing program numbers stays the same, it is just "1" appeared in front of them. Device still understands entered 3 digit program number (via SMS/GPRS), it will automatically add "1" before it. If you enter "247" - device will turn it into the "1247". In Bootloader it is only 4 digit format available, just add "1" in from of the needed program number.
Due to the growing number of supported cars, program numbers have exceeded "999". In order to maintain one number format, we are moving from 3-digit to 4-digit program numbers.<br/>In new LV-CAN200/ALL-CAN300 firmware (from 2017-09-01) all program numbers that were up to 999 are changed to start from 1000. So that further program numbers would continue the counting with 4-digit numbers.<br/>However, all existing program numbers stay the same, but "1" is added to the front. Device still understands the entered 3-digit program number (via SMS/GPRS), it will automatically add "1" before it. If you enter "247" - device number will turn into "1247". In Bootloader only 4-digit format is available, just add "1" to the front of the needed program number.
===Example===
===Example===
When using older connection schemes where program number displayed as 3 digit program number:
When using older connection schemes where program number displayed as 3-digit program number:
[[Image:Fmb120_can_prog_number.png|600px|center]]
[[Image:Fmb120_can_prog_number.png|600px|center]]
Using LV-CAN200/ALL-CAN300 Bootloader from soft version 2017-09-27 need to add "1" before it:
Using LV-CAN200/ALL-CAN300 Bootloader from soft version 2017-09-27 it is necessary to add "1" to the front of program number:
[[Image:Fmb120_can_updater.png|400px|center]]
[[Image:Fmb120_can_updater.png|400px|center]]