2,414
edits
Changes
How to start with FMB devices and Beacons? (view source)
Revision as of 19:52, 9 September 2022
, 19:52, 9 September 2022Jira task GTPGTM-1089
[[EYE BEACON / BTSID1|Eye Beacons]] are designed to make your wireless experience much more easy than ever because there is not need to make a previous configuration, the device has a pre-charged config from factory, this ensures a good operation.
[[EYE BEACON / BTSID1|Eye Beacons]] are designed to make your wireless experience much more easy than ever because there is not need to make a previous configuration, the device has a pre-charged config from factory, this ensures a good operation.
Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
• Transmitting at 2 dBm power.
• Data advertising at 1 second intervals.
• Eddystone and Sensors protocol
[[File:BTSMP1 wiki.jpg|center|frameless|401x401px]]
You can find detailed information about how to configure those parameters below:
==Beacon Configuration and data sending==
==Beacon Configuration and data sending==
