Changes

Once vehicle‘s axes are calculated, device is considered calibrated.<br>

Once vehicle‘s axes are calculated, device is considered calibrated.<br>

<br>

<br>

Note: moving forward along any axis will generate negative values. This means acceleration will generate -X values, accordingly breaking will generate X values. Same goes for other axes. <br>

'''Note:''' moving forward along any axis will generate negative values. This means acceleration will generate -X values, accordingly breaking will generate X values. Same goes for other axes. <br>

Configurable parameters can be found at [[{{{model|FMB1YX}}}_System_settings#Accelerometer_Auto_Calibration|System Settings Accelerometer Auto Calibration]]

Configurable parameters can be found at [[{{{model|FMB1YX}}}_System_settings#Accelerometer_Auto_Calibration|System Settings Accelerometer Auto Calibration]]

When vehicle stops for a specific amount of time the scenario is activated, a record will be generated and digital output status will be changed to 1 when configured. You can configure the time it takes to turn on this scenario (''Time to Stopped''). Scenario is activated until the vehicle starts moving (movement is detected only by the accelerometer) and keeps moving for an amount of time that is configured. You can configure the time it takes to turn off this scenario (''Time to Moving'')<br/>{{{dout|info}}}

When vehicle stops for a specific amount of time the scenario is activated, a record will be generated and digital output status will be changed to 1 when configured. You can configure the time it takes to turn on this scenario (''Time to Stopped''). Scenario is activated until the vehicle starts moving (movement is detected only by the accelerometer) and keeps moving for an amount of time that is configured. You can configure the time it takes to turn off this scenario (''Time to Moving'')<br/>{{{dout|info}}}

<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>

 

When there is no GPS fix, the system uses accelerometer data to determine movement: <br>

 

'''*''' If the ignition is on and the accelerometer detects movement without a GPS fix, the vehicle is not considered idling. <br>

'''*''' If the ignition is on but the accelerometer indicates no movement without a GPS fix, the vehicle is considered idling.<br>

'''*''' If the ignition turns off during detected excessive idling, an AVL ID: 251 and Value: 0 will be generated.<br>

 

<br/><br/><br/><br/><br/><br/>

}}}

}}}

==Crash Detection==

==Crash Detection==

[[File:Crash Detection cfg.PNG|right]]

[[File:Crash Detection.PNG|right]]

[[Crash_trace|Click here to enter Crash Tracer data parsing page]]

[[Crash_trace|Click here to enter Crash Tracer data parsing page]]